Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Thank you, now I know the terminology for what I need.

As for the Behringer FCB 1010, it won't fit on my pedal board! Heheh. So, I'm stuck with the Control One

--- In gsp-2101@yahoogroups.com, Hari Floura <scorpio65@...> wrote:
>
> What you need is a Midi Switcher, suggest you do do a search on Musicians Friend 
> or Sam Ash site for more info. Typical Midi Switchers can control several 
> devices and can be pricey. Since you only need to control one pedal, you may 
> want to consider replacing the foot controller with a Behringer FCB 1010 
> which has this option already integrated into it (and is fairly low cost). 
> Unfortunately you will need to acquaint yourself with MIDI to be able to set 
> everything up. Speaking from experience it can be frustrating because of poorly 
> written manuals, but not impossible (thanks to google :) )
> 
> 
> 
> 
> ________________________________
> From: Steven Vachon <prometh@...>
> To: gsp-2101@yahoogroups.com
> Sent: Wed, July 14, 2010 8:29:53 AM
> Subject: [gsp-2101] Re: Use GSP2101 to control Boss/etc pedals?
> 
> Â  
> I already stated that I don't know if such an interface even exists. I've read 
> through the manual, but I don't fully understand MIDI itself yet, so the manual 
> kinda goes over my head.
> 
> Figured I'd ask here if anyone's done this yet, but I guess that was wrong?
> 
> --- In gsp-2101@yahoogroups.com, M M <strategy400@> wrote:
> >
> > 
> > You failed to describe the type of interface that allows your overdrive pedal 
> >to be bypass/engage(d).
> > 
> > 
> > 
> > Also, the manual for the 2101 is quite good. 
> > 
> > 
> > 
> > "Never put off till tomorrow what you can ignore entirely."
> > 
> > 
> > 
> > 
> > 
> > 
> > To: gsp-2101@yahoogroups.com
> > From: prometh@
> > Date: Tue, 13 Jul 2010 21:06:16 +0000
> > Subject: [gsp-2101] Use GSP2101 to control Boss/etc pedals?
> > 
> > 
> > 
> > 
> > 
> > Basically, when I switch off the distortion via a button on the Control One, 
> >I'd like for some kind of device connected to the GSP2101 in MIDI-Thru to 
> >bypass/engage my overdrive pedal.
> > 
> > But, does such a device exist? Would it be able to understand the sysex 
> >messages? Since I'm not entirely educated on MIDI, I haven't had much luck 
> >investigating this myself.
> > 
> > Thanks
> > 
> > 
> > 
> > 
> > 
> > __________________________________________________________
> > Hotmail is redefining busy with tools for the New Busy. Get more from your 
> >inbox.
> >http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2
> >2
> >
>