Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Message

Re: [gsp-2101] calibrate

2011-06-20 by Graham Pearson

I've successfully tried all kinds of 12AX7 tubes in both my regular 2101 and my 2101 Pro without any ill side effects. Yes, your 2101 might sound different than another 2101 with the same or different tubes, but who cares? As long as it sounds good to you.
For the purists, even the same 12AX7 tubes from the same manufacturer can have different characteristics because of manufacturing variances and can therefore sound different.
In short, listen with your ears. There's nothing going to "blow up" in your 2101 just because you're using a 12AX7 that has different characteristics than the ones that came "stock" with your new unit. Go for it. Buy a few 12AX7 tubes from different manufacturers and start swapping away.
----- Original Message -----
From: M M
Sent: Sunday, June 19, 2011 9:29 PM
Subject: RE: [gsp-2101] calibrate

It's confusing but it seems like many people are buying whatever tubes and putting them in and it works fine? I see that its possible that your 2101 might sound different from another 2101 by doing it this way (not necessarily bad?). If it means that slight gain adjustments might have to be made between units I might be able to live with that. I only really use my 2nd unit as a backup.

Does digitech still sell tubes for these?



"Never put off till tomorrow what you can ignore entirely."


To: gsp-2101@yahoogroups.com
From: mikedv1@...
Date: Sun, 19 Jun 2011 21:50:49 +0000
Subject: [gsp-2101] calibrate

How do you calibrate preamp tubes for the 2101?


Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.