Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

If your controller is failing then this wont help much- but I can tell 
you that you can get new switches and either find a music repair place 
or replace them yourself- its pretty easy actually. If it is working, 
then here is how I set mine up, just to give you an idea.

So the way I configured mine (which has its drawbacks but is working ok) 
is that I assigned the bank as bank up and the bypass as bank down.

In all banks, sw 0 is a clean dry, and with no volume I get no noise. Sw 
9 brings up the tuner.

Sw 2-5 are gradual increases in gain such that:

bank 1 is clean, sw1 & 2 are for acoustic guitar, sw 3 & 4 are electric 
guitar with different gain stages for a clean sound.

bank 2 saturation- Sw1 low sat, sw 5 highest sat

bank 3 overdrive sw1 low -sw5 high

and so on:

bank 4 heavy sustain

bank 6 grunge.

bank 7 - 9 have my favorite factory settings.

In banks 1 - 6, sw 6, 7,8 are detune/chorus/flanger. (I would add delay 
but there isn't enough memory so I use a reverb/delay processor in the 
effects loop)

*I do have the 3.00 upgrade along with the higher clock.

On 10/28/2017 10:44 AM, 'Graham Pearson' me@... [gsp-2101] 
wrote:
>
> \ufeff
>
> As a follow-up to my previous message, you'll have to perform the foot 
> switch reassignment steps for each of the banks.� In other words, you 
> have to reassign 2 foot switches in each of the banks 1 through 10 for 
> the Bank Up and Bank Down switches to work for every bank.
> For chip-sets prior to version 3.00.00, there's no way of reassigning 
> foot switches 1 through 0 to perform "Bank Up" or "Bank Down" 
> operations by using the GSP-2101 front panel buttons. 
> However,�MIDIWizard can do this, even for�chip-sets earlier than 3.00.00.
>
>     ----- Original Message -----
>     *From:* tguitar@... [gsp-2101]
>     <mailto:tguitar@...%20[gsp-2101]>
>     *To:* gsp-2101@yahoogroups.com <mailto:gsp-2101@yahoogroups.com>
>     *Sent:* Saturday, October 28, 2017 9:11 AM
>     *Subject:* [gsp-2101] Manually change banks on GSP 2101
>
>     I am having trouble with the Program/bank/Tuner peddle on my
>     Control One Foot Controller..
>
>     Does anyone know if it is possible to Manually change banks on the
>     GSP 2101 ?
>
>     I've never had this problem before so I'm kind of at a loss.
>     Thanks for any input.
>
>