Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Thanks very much for the information. I have 3.00 version. I'll give this a try. I'll let you know how I make out.
---- "'Graham Pearson' me@... [gsp-2101]" <gsp-2101@yahoogroups.com> wrote: 

=============
If your Bank Up or Bank Down foot switches have failed on your Control One, you can configure any of the other Control One foot switches to perform Bank Up or Bank Down operations.  For example, you can configure foot switch 0 to perform a "Bank Up" and foot switch 5 to perform a "Bank Down".  Using this approach, you lose the capability of selecting a couple of programs in each bank (such as programs 5, 10, 15, 20, etc.) but perhaps you can rearrange your user programs so you don't need to select a couple of programs in each bank from your Control One.

I think you'll need the version 3.00.00 chip-set to reassign Control One foot switches to Bank Up and Bank Down.  I haven't been able to reassign foot switches on our GSP-2101s with earlier chip-sets.  Here's the scheme for the version 3.00.00 chip-set.  it's described on page 76 of the GSP-2101 Artist Owner's Manual.

1. Press the [Utility] button
2. Press Function key [2] --> Foot Controller
3. Press the Function key [1] --> Patch Assignment
4. Use Function key [2] to select which foot switch you want to reassign.  For example, select foot switch 5.
5. Use Function key [3] to select the functionality of foot switch 5.  You might have to scroll through a bunch of options before you reach "Bank Down".

You'll perform a similar series of menu selections for reassigning foot switch 0 to "Bank Up".

Please let us all know if this solution works for you.  Hope it helps.
Graham








  ----- Original Message ----- 
  From: tguitar@... [gsp-2101] 
  To: gsp-2101@yahoogroups.com 
  Sent: Saturday, October 28, 2017 9:11 AM
  Subject: [gsp-2101] Manually change banks on GSP 2101


    

  I am having trouble with the Program/bank/Tuner peddle on my Control One Foot Controller..

  Does anyone know if it is possible to Manually change banks on the GSP 2101 ?

  I've never had this problem before so I'm kind of at a loss. Thanks for any input.