Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

I have already started a forum on this on the digitech site, I 
have copied it to this mail. Hoppe it can be useful.

This is very simple. You probably have a head amp or a combo 
wich has it's own pre. What you have to do is connect you 
effect send to a Y cable tha will split the signal in 2 equal 
signals and connect one to (say) the left return of the 2101 
and the other do the input of your combo or head amp. Then 
connect the amp's effect loop send to the other return of the 
2101, in this case the right one. Then you plug you output of 
the digitech to the effect loop return of your amp and voila 
you have 2 pre totaly independent that you can mix using 
algoritms that can do that (mail me if you want some diagrams 
on algoritms that use dual pre) and you can also control de 
master volume whith the output level control of the 2101. It 
sound great if you have good power amp (valves are the thing) 
and a good pre (valves are the thing). Hoppe it can be useful.

Remember that the 2101's loop leaks so you are alway gona hear 
a bit of 2101's pre.
I have just bought a ppc-210 and artist software from Dieter 
Waechter and I'm waiting to start some serious argoritms to 
make the 2101 work just like the 2120.

One advice:

 - Use the 2101 stereo noise gate to gate the clean sound, and 
add another one to the algoritm to gate the distorced sound.

Any thing just say

Pedro Ferreira

--------------------------------------------
Webmail da rede SAPO - http://webmail.sapo.pt/