Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

I upgraded a few years back from 2.x to 3.00.00.a

I noticed that the EPROMS fit VERY tight in my sockets.  I also had to bend
the pins in a bit (which I understand is not unusual).  To do this, place
the entire row of pins on a table ledge and GENTLY apply pressure so the row
bends in toward the middle of the EPROM package.

Wasn't a difficult job, very straightforward once I had the pins lined up.
I believe you do a hard reset so back up whatever you want to keep because
it will be gone after the installation.

Don't know about performance from 1.x, but from 2.x you got the Artist
patches, the tuner and I believe some of the digital effects were improved.
Check the digitech site and they probably have a software revision history.

Cheers.

-----Original Message-----
From: rhay777 [mailto:rhay@...]
Sent: Tuesday, April 08, 2003 7:12 PM
To: gsp-2101@yahoogroups.com
Subject: [gsp-2101] eprom replacement


i am about to change my eproms.  im going from 1.02.00 or something
to 3.00.00.  any tips and/or precautions?  also, what can i expect
after upgrading in performance?  also, i have lots of u2 sysx files
if anyone is interested in sharing some sysx files.  thanks.


ryan




To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/