Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

ok, i got the right tools and inerted the eproms.  when i put them in 
the way on the directions "with the notch towards the rear of the 
unit", i only get a red bar in the led screen.  when i put it in with 
the notch towards the front, the front panel lights up, but is 
unresponsive to hard reset.  any suggestions?

ryan


> I noticed that the EPROMS fit VERY tight in my sockets.  I also had 
to bend
> the pins in a bit (which I understand is not unusual).  To do this, 
place
> the entire row of pins on a table ledge and GENTLY apply pressure 
so the row
> bends in toward the middle of the EPROM package.
> 
> Wasn't a difficult job, very straightforward once I had the pins 
lined up.
> I believe you do a hard reset so back up whatever you want to keep 
because
> it will be gone after the installation.
> 
> Don't know about performance from 1.x, but from 2.x you got the 
Artist
> patches, the tuner and I believe some of the digital effects were 
improved.
> Check the digitech site and they probably have a software revision 
history.
> 
> Cheers.
> 
> -----Original Message-----
> From: rhay777 [mailto:rhay@l...]
> Sent: Tuesday, April 08, 2003 7:12 PM
> To: gsp-2101@yahoogroups.com
> Subject: [gsp-2101] eprom replacement
> 
> 
> i am about to change my eproms.  im going from 1.02.00 or something
> to 3.00.00.  any tips and/or precautions?  also, what can i expect
> after upgrading in performance?  also, i have lots of u2 sysx files
> if anyone is interested in sharing some sysx files.  thanks.
> 
> 
> ryan
> 
> 
> 
> 
> To unsubscribe from this group, send an email to:
> gsp-2101-unsubscribe@egroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/