Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Message

Re: [gsp-2101] Setup for 2101 & TriaAxis using NoiseGate & Tuner

2003-06-22 by mb

Hi Tod, your second possibility sounds very good:
Guitar ->; GSP In
GSP FX Send -> Triaxis
TriAxis Out -> GSP Return
GSP Out -> Amp
two questions left:
1) the GSP Send goes directely into the MAIN INPUT of the triaxis?!
2) what about noisegate, volume pedal and tuner, will they all work?!
thanks already:)
----- Original Message -----
Sent: Sunday, June 22, 2003 5:14 AM
Subject: Re: [gsp-2101] Setup for 2101 & TriaAxis using NoiseGate & Tuner

Here's one possibility:

Guitar -> GSP In
GSP FX Send -> Triaxis
Then back to your path
TriAxis FX Send -> GSP Return
GSP Out -> TriAxis Return
TriAxis Out -> Amp

With this you HAVE to make sure that you're wet/dry mixer is always 100% wet and the FX loop is set to No Sum. Anything less than the 100% wet and you will start to hear the GSP analog section with out your Triaxis.
Using it this way you have to adjust the wet dry levels using the mixers in the algorithm but that's the way I always preferred to do it anyway

You could also do it this way:

Guitar -> GSP In
GSP FX Send -> Triaxis
TriAxis Out -> GSP Return
GSP Out -> Amp

Which is the way I generally do it. Still keeping wet/dry at 100% and FX loop set to No Sum.




At 08:28 PM 6/19/2003 +0200, you wrote:

Setup for 2101 & TriaAxis using NoiseGate & Tuner
hello, greetigs from germany;-D

I play a TriAxis and the GSP as a standard setup meaning

Guitar -> TriAxis
TriAxis FX Send -> GSP Return
GSP Out -> TriAxis Return
TriAxis Out -> Amp

, right?!

It works fine!!
The only problem is that the NoiseGate and the tuner won't work that way, same to the Volume Pedal used for Master Volume.
I would "only" need the TriAxis PreAmp and the digital section of the GSP but with the desired Gate, Volume and Tuner functions.

Can anybody help?!



www.michaelborchers.net/sb - personal
www.michaelborchers.net/tri - TriAxis
www.michaelborchers.net/rm - Rockman
www.memoriesfading.de - band
www.cd-pla.net - cd review community


Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



To unsubscribe from this group, send an email to:
gsp-2101-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.