Re: 2101: Straight to the board through which outputs?
2001-01-10 by Aaron Heck
Still a little confused, Is the Speaker Emulation different that the Compensation switch? I see the Comp. Switch on the back, near the XLR outs. Is there something different I need to do to enable speaker emulation? Aaron XORGATE@... wrote:
Show quoted textHide quoted text
> Like others, I use the XLRs out to the 1/4 " inputs of one of my > Mackies(1604vlz or SR24-4),with speaker emulation, and the speaker > compensation switch (rear panel)activated. I made my own cables,Switchcraft > XLRs,some good 18 guage shielded cable wired to 1/4" TRS jacks.(balanced) I > tried going into the mic inputs,but at any level got clipping,so i plugged > into the 1/4" line ins and got great sounding results.I use Alesis "Monitor > Two" speakers.(plus a BBE 462,and other out board processors thru inserts/aux > sends etc.)This is my project studio setup. My live setup is a bit > different. I use two amps or a Mesa 2.90 power amp,therefore i use the 2101's > 1/4" stereo outs. > Good luck, Ric. > ====================< DigiTech 2101 Users Group >==================== > | To Post Messages to Group... TO: 2101@... > | > | To UNSUBSCRIBE, email... TO: majordomo@... > | MESSAGE: unsubscribe 2101 > | > | To Access MESSAGE ARCHIVES... TO: majordomo@... > | (e.g. 2000,Jan) MESSAGE: get 2101 21010001 > | > | To Report Problems... TO: 2101-owner@... > =====================================================================