Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor group photo

Yahoo Groups archive

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Index last updated: 2026-04-28 23:25 UTC

Thread

Control sequencer with GSP-2101FC?

Control sequencer with GSP-2101FC?

2006-08-15 by dpstorm

Is it possible to control a computer based sequencer (such 
as Cubase) with the GSP-2101FC through the GSP-2101? If 
so, how would you set it up?

I've heard of a sequencer changing programs on the GSP-
2101; but I want to use the foot controller to control the 
sequencer to start/stop/rewind songs.

Any ideas, suggestions?

TIA,

dpstorm

Re: [gsp-2101] Control sequencer with GSP-2101FC?

2006-08-16 by Graham Pearson

DP:
There's no way to do what you want to do. The 2101FC is not capable of transmitting start/stop/rewind messages. It can only transmit Program Change and Control Change (CC) messages. Your 2101 has no way of translating these messages into start/stop/rewind messages before it sends them out of its MIDI Thru port.
The only solution would be to intercept CC messages coming out of the 2101's MIDI Thru port using a computer and translate these into start/stop/rewind messages before sending them to your sequencer.
;
Hope this helps.
Graham
Show quoted textHide quoted text
----- Original Message -----
From: dpstorm
Sent: Tuesday, August 15, 2006 3:39 PM
Subject: [gsp-2101] Control sequencer with GSP-2101FC?

Is it possible to control a computer based sequencer (such
as Cubase) with the GSP-2101FC through the GSP-2101? If
so, how would you set it up?

I've heard of a sequencer changing programs on the GSP-
2101; but I want to use the foot controller to control the
sequencer to start/stop/rewind songs.

Any ideas, suggestions?

TIA,

dpstorm

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.