Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Hi, 
New member here, please be tolerant!
Just wondering if anyone has had any experience with Soldano amps 
effect loops - they run at line level. Having tried connecting my 
software version 1.00 GSP 2101 through the loop, I find I have to turn 
up the output levels to get any decent volume levels and it 'aint 
sounding too good when clipped, especially with the SLO amp overdrive 
engaged. Anyone have any suggestions that may help me get around this. 
I live in the UK, so sending back my amp to have the FX loop modded is 
not a viable option. Any help would be much appreciated. My apologies 
if this has already been covered. Thanks in advance

As said above...  how are you making the connection between the 2101 
and your amp's loop?

--- In gsp-2101@yahoogroups.com, "dunkin_donut3" <dunkin_donut3@...> 
wrote:
>
> As said above...  how are you making the connection between the 2101 
> and your amp's loop?
>
Hi,
 The Gsp 2101 is connected to the amp effects loop with the input from 
the 2101 into the send of the loop and the output of the 2101 into the 
return. Just a thought but would using the XLR connectors help any ?. 
If so, how could this be configured to the amp loop?

--- In gsp-2101@yahoogroups.com, Steve Dudley <snd6760@...> wrote:
>
> How do you have it connected to your amp? A long time ago I used my 
2101 in the FX loop I added to a 50W JCM 800 I used to have and I had 
to connect the 2101 so that it's preamp was bypassed and only the 
2101's FX were used. It's been so long ago I forget exactly how I had 
them wired together. Maybe you just have a connection problem with 
your setup?
> 
> asdaboyy <asdaboyy@...> wrote:                                  Hi, 
>  New member here, please be tolerant!
>  Just wondering if anyone has had any experience with Soldano amps 
>  effect loops - they run at line level. Having tried connecting my 
>  software version 1.00 GSP 2101 through the loop, I find I have to 
turn 
>  up the output levels to get any decent volume levels and it 'aint 
>  sounding too good when clipped, especially with the SLO amp 
overdrive 
>  engaged. Anyone have any suggestions that may help me get around 
this. 
>  I live in the UK, so sending back my amp to have the FX loop 
modded is 
>  not a viable option. Any help would be much appreciated. My 
apologies 
>  if this has already been covered. Thanks in advance
>  
>  Hi
Thanks for the reply. I don't actually use the preamp of the 2101 
with the overdrive of the SLO. Even with just the delay, reverbs and 
chorus, I am getting unwanted clipping because the output level of 
the 2101 has to be so high. Maybe its time to change my fx unit!
Thanks >      

>                        
> 
>  
> ---------------------------------
> Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
>