Re: 2101:program memory
2001-12-10 by Dieter Waechter
Hallo Klaus! 1. ja-(I mean- Yes!) There are different possibilities: - a) replace the 15 unused patches with a small patch. (no digital...) - b) replace the 15 unused patches with factory patches. - c) store 15 of the 85 used patches to disc and delete them from your 2101. you will have some free memory. 2. yes- you are right. 3. The english term of leiterbahn is conducting path :-) Why buy a new one? replacing the switches is no problem- and the chables of the expped: solder 2 soldering-pins into the holes (L\ufffdtst\ufffdtzpunkte)... then solder the wires to the pins and shrink them in shrinking tube (in Schruumpfschlauch einschrumpfen).- holds for eternity. 4. Yes- you can download them- or mail to me- I'll send them to you. 5. you can search the archives here: http://groups.yahoo.com/group/gsp-users/messages http://groups.yahoo.com/group/gsp-2101/messages http://groups.yahoo.com/group/GSP2101/messages Dieter
Show quoted textHide quoted text
----- Original Message ----- From: "klaus dibbelt" <Klaus.Dibbelt@...> To: "dieter waechter" <waechter.dieter@...>; <majordomo@...> Sent: Friday, December 07, 2001 5:26 PM Subject: 2101:program memory hi dieter, and hallo everybody in this forum! i own and use a 2101 (artist upgrade, PPC) for many years (95?) and a couple of days ago, i found the 2101-listmail. your contributions to this forum are very interesting, and you seem to know a lot about this device. many of the questions that came up over the years could have been solved easier, if i had been on the web before. it\ufffds always a pleasure to meet someone who\ufffds both competent and helpful. i would be very happy, if you could tell me something about the following things (it`s not at all urgent!): 1. the program memory seems to be not sufficient for all 100 user patches. i\ufffdve stored about 85 programs (and a couple of algorithms, but they use a different memory, as far as i know), and any time i want to store another one, i get the message: out of program memory. can i do anything about that? 2. one algorithm is called "no digitals". but i suppose, there\ufffds not a hardware bypass for the fx-section. so the signal will be digitalized anyway, right? (unless i use the fx send as an output) 3. my fc2101 is kind of "worn out". i had to change the switches a couple of times (and to fix the torn off cable of the expression pedal even more often). so that it became hard to get a contact between the solder and the leiterbahnen (don\ufffdt know the english term). since you even seem to be into hardware problems: is there a cheaper way than to buy a new one? 4. is there a free- or shareware windows editor for the 2101? 5. finally a question, that can probably be answered by anyone on this list: i couldn\ufffdt find out, how to get into the the mailing archive for the 2101 list. i\ufffdm sure i can learn a lot from that correspondence (and moreover i wouldn\ufffdt have to repeat questions that have already been discussed). nonetheless i\ufffdm afraid this one be my last question for help.. thanks a lot in advance! klaus