Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Hi all,
     How can you tell if you need the PPC-210 upgrade.  Can a PPC-210 
already be installed from the factory or is this an after market add 
on??? I have the GSP2101 Artist addition.  So i was wondering if 
anyone new how I can find out if I already have this installed.

Check the number of total programs you have. If it stops at 240, you do not have a PPC-210, and if it goes up to 255, you have a PPC-210 installed.

The PPC-210 only came factory installed on the GSP-2101 Limited Edition and the GSP 2101 Artist PRO.

The PPC-210 adds a 2nd S-DISC processor and allows for more complex programs and seamless switching (without the short break in the sound as you change programs). The two features are mutually exclusive. If you switch between complex programs that use both S-DISC processors, seamless switching cannot be achieved since there is no "free" processor to "pre-load" the new program and crossfade over.

-AT

> -----Original Message-----
> From: ryan [mailto:nonpoint28376@...]
> Sent: Friday, August 13, 2004 8:41 AM
> To: gsp-2101@yahoogroups.com
> Subject: [gsp-2101] PPC-210
> 
> 
> Hi all,
>      How can you tell if you need the PPC-210 upgrade.  Can a PPC-210 
> already be installed from the factory or is this an after market add 
> on??? I have the GSP2101 Artist addition.  So i was wondering if 
> anyone new how I can find out if I already have this installed.
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> --------------------~--> 
> Tired of hearing the same songs over and over?
> Listen to Internet Radio! Skip songs. Click to listen to LAUNCHcast!
> http://us.click.yahoo.com/Ykrq7C/HARHAA/n1hLAA/XkLolB/TM
> --------------------------------------------------------------
> ------~-> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>

Anyone know were I can get some of the components of the PPC-210.  I 
am looking for the dsp and the board.

Hi All,
Is the PPC-210 still available anywhere?  Does installing the board
require any soldering or is it pretty straight forward, plugin then
move a jumper (he said hopefully)?

Thanks for any help.
David

>Hi All,
>Is the PPC-210 still available anywhere? 

Yes. here:
http://search.ebay.com/_W0QQsassZchronotronix
Dieter

Thanks Dieter,

I just bought it.  And thanks for the encouragement all.  I
had searched the group and found the earlier (2007) posts regarding
Dieters inventory and had thought for sure that it would be gone. Lucky
me!



Now... does anybody have any ideas regarding my earlier post about the
pump noise?  Anyone have any suggestions on how I might reasonably
put a shield between me and my guitars?  : )



Cheers!



David

David.
He is the authourity.  I am a happy customer of his and I highly recomend him.
I have a Limited Addition (Purple Haze) and provided me with the 3.000a upgrade.
Keep rockin

----- Original Message ----
From: David Reeves-Brown <thesongsmyth@...>
To: gsp-2101@yahoogroups.com
Sent: Wednesday, July 9, 2008 11:41:02 AM
Subject: [gsp-2101] Re: PPC-210


Thanks Dieter,
I just bought it.  And thanks for the encouragement all.  I had searched the group and found the earlier (2007) posts regarding Dieters inventory and had thought for sure that it would be gone. Lucky me!

Now... does anybody have any ideas regarding my earlier post about the pump noise?  Anyone have any suggestions on how I might reasonably put a shield between me and my guitars?  : )

Cheers!

David

I can Also attest to Deiter's PPC cards, I am running
a 2101 with an origional Digi card and in tandem I use
a TSR-24s with one of his cards in it, The PPC-200 and
210 are also the same, I have the origional manual
that came with the TSR upgrage, it is the PPC-200/210
installation guide,
    Dave

David
 
I am assuming that you have already have shielding in your guitars  (cavity & covers lined with copper or metal foil and connected to ground) and you are still getting interference?
Regards
Hari

----- Original Message ----
From: David Reeves-Brown <thesongsmyth@...>
To: gsp-2101@yahoogroups.com
Sent: Wednesday, July 9, 2008 11:41:02 AM
Subject: [gsp-2101] Re: PPC-210


Thanks Dieter,
I just bought it.  And thanks for the encouragement all.  I had searched the group and found the earlier (2007) posts regarding Dieters inventory and had thought for sure that it would be gone. Lucky me!

Now... does anybody have any ideas regarding my earlier post about the pump noise?  Anyone have any suggestions on how I might reasonably put a shield between me and my guitars?  : )

Cheers!

David

Hi Hari,
Actually, I haven't tried lining the insides of my guitars.  I did try
placing sheets of aluminum foil between my body and the guitars to no
avail.  Although I have not tried copper foil. Also the aluminum
"shield" was not grounded so that might be something to try as well.  

I am going to try your suggestion on my strat with the copper foil. 
Thanks for your help!  I'll post back as soon as I can try it.

Cheers!
David

--- In gsp-2101@yahoogroups.com, Hari Floura <scorpio65@...> wrote:
>
> David
>  
> I am assuming that you have already have shielding in your guitars 
(cavity & covers lined with copper or metal foil and connected to
ground) and you are still getting interference?
> Regards
> Hari
>  
> 
> 
> 
> ----- Original Message ----
> From: David Reeves-Brown <thesongsmyth@...>
> To: gsp-2101@yahoogroups.com
> Sent: Wednesday, July 9, 2008 11:41:02 AM
> Subject: [gsp-2101] Re: PPC-210
> 

> 
> Now... does anybody have any ideas regarding my earlier post about
the pump noise?  Anyone have any suggestions on how I might reasonably
put a shield between me and my guitars?  : )

> 
> Cheers!
> 
> David
>