Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Hi,

today, i received my two eproms to upgrade my 2101, and i did exactly
what was said on this site:

http://home.arcor.de/pirat28/sites/gsp2101eprom.htm

but when i switched on my 2101, all the leds in the display were on
and nothing happened... The system could not boot or reset at all...

i have put back the 2.01 eproms again, because i need to play with it
tomorrow, but i hope i can soon upgrade to 3.0

does anyone know a solution to this problem?

thanks in advance!

best regards, Sander

Did you do the factory reset properly after installing the EPROMS? 
Your finger has to be pressing and holding function key 1 WHILE 
turning on the power.
 
--- In gsp-2101@yahoogroups.com, "wizzie1982" <wizzie1982@y...> wrote:
> 
> Hi,
> 
> today, i received my two eproms to upgrade my 2101, and i did 
exactly
> what was said on this site:
> 
> http://home.arcor.de/pirat28/sites/gsp2101eprom.htm
> 
> but when i switched on my 2101, all the leds in the display were on
> and nothing happened... The system could not boot or reset at all...
> 
> i have put back the 2.01 eproms again, because i need to play with 
it

> tomorrow, but i hope i can soon upgrade to 3.0
> 
> does anyone know a solution to this problem?
> 
> thanks in advance!
> 
> best regards, Sander

Yes i did... i push and hold the function 1 key while switching on the
2101, but as soon as i switch it on, all the red leds will light up.
Is this a normal procedure, and if yes... how long wil they be on? and
what  do i do next? ;)



--- In gsp-2101@yahoogroups.com, "saber540ltd" <saber540ltd@y...> wrote:

> 
> Did you do the factory reset properly after installing the EPROMS? 
> Your finger has to be pressing and holding function key 1 WHILE 
> turning on the power.