Synth-DIY Yahoo! Groups Archives

Midi question

2005-03-18 by christoph_heckmann2000

Hi guys,

could anyone explain how I can change programmes on my GSP2101. 
Let´s say I want to change programmes on MIDI-channel 7! What kind 
of settings do I have to do?

PROBLEM: I already tried to send PC messages on channel 7 but 
nothing´s happening?! First of all I thought the MIDI In was broken 
but I also connected a MIDI cable from the GSPs MIDI-Thru to another 
MIDI device and it works! So the GSP must receive MIDI-information 
but, again, there´s no programme change on the GSP.

Any suggestions would be greatly appreciated!
Chris

Everything you need to check is on 2101's first MIDI menu. To display the first MIDI menu, press the [MIDI] button once. If everything on this display is correctly set, then your 2101 must have a hardware problem.

The 2101's MIDI "receive" channel must match the channel you are sending messages on, channel 7 in your case. Use function key [1] and the Data wheel to adjust this value.

Next, the MIDI In map must be set according to the programs you want to load. To change these values, use the function keys [2] and [3] and the Data wheel to change values. ; The factory settings are: you receive MIDI Prg 1 as GSP Prg 1, MIDI Prg 2 as GSP Prg 2, etc.

When you're finished changing these values, press the [MIDI] button to return to the program display.

If everything looks good on this MIDI menu and your 2101 still doesn't respond to MIDI messages, and you're confident that your 2101 IS receiving MIDI messages because you've tested MIDI Thru, there's got to be a hardware problem.

Please let us know what the eventual outcome is. If the problem turns out to be other than a hardware problem, we need to know !!!

Best Regards,

Graham Pearson

Mailist to discuss all issues regarding the Digitech GSP-2101 Guitar FX Processor

Midi question

Midi question

Re: [gsp-2101] Midi question

Move to quarantaine