Depending on the default into which these displays start, it might be necessary to pull up pin 17 (character width), by the way - that will be evident if the text is cut off and oddly spaced. Am 13.09.2019 um 19:25 schrieb Mo Morgan lightsforsynths@... [k5synth]: > � > Did it come�with a presoldered ribbon cable? Because the problem could > also be the cable orientation > > On Friday, September 13, 2019, 01:15:04 p.m. EDT, Sevo Stille > sevo@... [k5synth] <k5synth@yahoogroups.com> wrote: > > > � > > I used http://artronic.eu/pl/p/LCD-AG-240064A-FHW-KW-E6/1036?currency=EUR > > Am 13.09.2019 um 18:38 schrieb Mo Morgan lightsforsynths@... > <mailto:lightsforsynths@...> [k5synth]: >> � >> Did you verify the model of lcd �was directly�swappable�with your lcd >> ?� t6963c doesn't make it directly compatible >> there could be�some additional electronics�you might� have to add. >> Also if your internal battery is dead you�would get blank text >> >> >> >> On Thursday, September 12, 2019, 07:53:19 p.m. EDT, Sevo Stille >> sevo@... <mailto:sevo@...> >> [k5synth] <k5synth@yahoogroups.com> <mailto:k5synth@yahoogroups.com> >> wrote: >> >> >> � >> >> It is the right controller. YMMV as to the layout of the plug and >> configuration of the display and connector. You might have to tweak >> the contrast, twist the cable, or set a cable bridge to change the >> font size.� Time for experiments - but there will be some setting >> where it works. >> >> Sevo >> >> Am 12.09.2019 um 21:57 schrieb nebelfuerst@... >> <mailto:nebelfuerst@...> [k5synth]: >>> � >>> >>> As my backlight is dead, I tried to avoid disassembling the LCD by >>> buying a replacement LCD. >>> >>> I read somewhere, that the type should be compatible with�T6963C >>> <https://www.ebay.de/itm/Powertip-LCD-Grafik-Display-24064-GLCD-240-64-PG24064E-PD-T6963C-1-St%C3%BCck/311819406726?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649>. >>> >>> So I bought this one: >>> >>> https://www.ebay.de/itm/Powertip-LCD-Grafik-Display-24064-GLCD-240-64-PG24064E-PD-T6963C-1-St�ck/311819406726?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 >>> >>> >>> I connected everything except the 100V. The display became black, >>> without any letters visible. >>> >>> Did anyone replace the complete LCD yet ? >>> >> >
Message
Re: [k5synth] Display swap with T6963C ?
2019-09-13 by Sevo Stille