K5synth

I did that and my inverter restarted to work, but not the backlight. 
About a month ago(Was now using 2 2x40 LCD backlights), the inverter 
died this time.
Also, I had a really loud hum coming out of the headphones plug before I 
added solder to every solder joints of the PSU board. (Some had cracks).

developer@... a écrit:

>
>
> > Dead or ALive?
> > ==============
> > Suddenly there was a green Light coming out of the corner.
> > "JUK! it´s alive again!" .. yes the backlight suddenly was working
> > again.... now the bad part: Tomorrow morning it turned dark again...
> > and it´s still ....
>
>
> Read following excerpt from an original message of Curt Malouin
>
> If you're LCD backlight is not working, the first thing you
> should try is heating up the joints and applying a bit more
> solder (a lot of the inverters suffer from cold solder joints,
> I guess).
>
> [From: malouin@... (Curt Malouin)
> Newsgroups: rec.music.makers.synth
> Subject: K5 output level mod
> Date: 27 Oct 1994 23:10:28 GMT
> Organization: University of Michigan Engineering, Ann Arbor
> Lines: 106
> Message-ID: <38pc14$fql@...>
> NNTP-Posting-Host: azure.engin.umich.edu]
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> <http://us.ard.yahoo.com/SIG=1290oge2f/M=273541.4247512.5496808.2248467/D=grplch/S=1705032144:HM/EXP=1089452711/A=2061551/R=0/SIG=11sr5b9n1/*http://launch.yahoo.com/artist/videos.asp?artistID=1001301> 
>
>
>
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/k5synth/
>        
>     * To unsubscribe from this group, send an email to:
>       k5synth-unsubscribe@yahoogroups.com
>       <mailto:k5synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>

-- 
antdes45@...