If your computer has USB ports (Most new ones do) you can get a midi to USB
convertor. Much easier to use than the game port. My Dell did not come with
a game port so I bought the midi USB and it works fine. Mine is made by M-
Audio and has a USB connection on one end and two midi cables (in/out) on
the other. Very simple to use. Good luck. If your K-4 has NO sounds at all,
the battery might have died. It is a flat cell like a BIOS battery in a
computer. On my K-1, the battery was soldered in place and I had to get a
flat cell with leads tack welded on. DO NOT try to solder leads to the
battery. They fry very quickly and might even explode!
Good luck.
Deny
Miami, Fl.
----- Original Message -----
From: "Alastor" <alastor32@...>
To: <kawaisynths@yahoogroups.com>
Sent: Wednesday, May 09, 2007 2:45 AM
Subject: RE: [kawaisynths] Re: Noobie in need of advice.
> Hi, yaros,
> I'm a newbie and bought a used K4 too. Mine had patches in, but I could
> use K4win. You should have to use a MIDI cable that has the IN-OUT plugs
> in one end, and and joystick connector in the other one. This sounds
> weird, but you need that connector to plug it in your joystick port of
> your soundcard if you don\ufffdt have MIDI connector. Just remember to plug the
> IN jack in the OUT intake of your K4 and the OUT jack in the K4 IN intake.
> If you have any doubt, just follow this link to see how the cable looks.
>
> http://www.pccables.com/05010.htm
>
> I hope this helps. Enjoy!
>
> Jose Angel
>
> yaros227 <yaros227@...> escribi\ufffd:
> Hi,
>
> I am more of a newbie than the first guy. I just bought a used K4 and
> found out there are no presets nor any patches. Please tell me how to
> load them to the K4. I downloaded the K4win software but do not know
> how to connect from the K4 to the computer. What cables do I need? My
> computer does not have a MIDI connection.
>
> Thanks in advance.
> yaros
>
> --- In kawaisynths@yahoogroups.com, "Ronald Hawkins" <siregbert@...>
> wrote:
>>
>> I use K4win it works like a charm to edit any parameter in the K4,
>> and works as a decent patch librarian. You'll want to make sure that
>> you set up the Midi section of the software to use the midi ins and
>> outs that are connected to the K4, and set the channel number
>> (usually channel 1) that the K4 is going to send and receive sysex
>> messages on.
>>
>> I registered this shareware, I was so impressed with it. I think
>> registration used to be a requirement for editing the effect and drum
>> parameters but last time I downloaded it, it seemed to be fully
>> functional right off the bat without my having entered my
>> registration key. I'd suggest registering anyway, it's cheap, and
>> it's good.
>>
>> Sending and receiving sysex messages is as simple as using the Get
>> Patch, Get Bank, Send Patch, and Send Bank commands from the menu.
>>
>> --- In kawaisynths@yahoogroups.com, "ottiscan2" <l_husky@> wrote:
>> >
>> > Hi,
>> >
>> > I'm new to the group and new to editing and downloading to a K4 and
>> > will apolagize in advance for my lack of knowledge. If anyone can
>> > answer a few of my questions it would be a great help.
>> >
>> > I have recently been using a midi interface (midisport) to edit
>> > presets on my Bass Vamp Pro with its editing software and was
>> > wondering if it's as easy to edit presets on the K4?
>> >
>> > I have downloaded two K4 editors, K4win and the MidiQuest demo.
>> >
>> > Will these tools be enough to do some editing in the K4?
>> >
>> > Can I save the edits?
>> >
>> > How do you get sysex files from the computer to the K4?
>> >
>> > Are the memory cartridges for the K4 still available?
>> >
>> > Is it possilbe to get a Hammond (hope that's not a bad word) sound
>> > out of the K4?
>> >
>> > These are probably fairly basic questions for you veterans out
>> there
>> > but a mystery to me.
>> >
>> > I'm impressed with the K4's sound, I bought it for my daughter to
>> > practice piano on but have since thought I could encorporate it
>> into
>> > some the songs I'm playing with my band.
>> >
>> > Thanks so much for any help you can provide.
>> >
>> > Cheers,
>> > Lew
>> >
>>
>
>
>
>
>
>
> Arrakis Crisis Web:
> http://www.geocities.com/alastor32/Arrakis_Crisis.html
>
> ---------------------------------
>
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y m\ufffdviles desde 1 c\ufffdntimo por minuto.
> http://es.voice.yahoo.com
> --0-349587307-1178693132=:21878
> Content-Type: text/html; charset=ISO-8859-1
> Content-Transfer-Encoding: 8bit
>
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
> "http://www.w3.org/TR/html4/strict.dtd">
> <html>
> <head>
> </head>
>
> <!-- Network content -->
>
>
> <body style="background-color: #ffffff;">
>
> <!--~-|**|PrettyHtmlStartT|**|-~-->
> <div id="ygrp-mlmsg" style="width:655px; position:relative;">
> <div id="ygrp-msg" style="width: 490px; padding: 0 15px 0 0; float:left;
> z-index:1;">
> <!--~-|**|PrettyHtmlEndT|**|-~-->
>
> <div id="ygrp-text">
> <p><div>Hi, yaros,</div> <div>I'm a newbie and bought a used
> K4 too. Mine had patches in, but I could use K4win. You should have to use
> a MIDI cable that has the IN-OUT plugs in one end, and and joystick
> connector in the other one. This sounds weird, but you need that connector
> to plug it in your joystick port of your soundcard if you don\ufffdt have MIDI
> connector. Just remember to plug the IN jack in the OUT intake of your K4
> and the OUT jack in the K4 IN intake.</div> <div>If you have any doubt,
> just follow this link to see how the cable looks.</div> <div> </div>
> <div><A
> href="http://www.pccables.com/05010.htm">http://www.pccables<wbr>.com/05010.<wbr>htm</A></div>
> <div> </div> <div>I hope this helps. Enjoy!</div> <div> </div>
> <div>Jose Angel<BR><BR><B><I>yaros227
> <yaros227@yahoo.<wbr>com></I></B> escribi\ufffd:</div> <BLOCKQUOTE
> class="replbq" style="BORDER-LEFT: #1010ff 2px solid;"><!-- Network
> content
> --> <DIV id="ygrp-text"> <div>Hi,<BR><BR>I am more of a newbie than the
> first guy. I just bought a used K4 and<BR>found out there are no presets
> nor any patches. Please tell me how to<BR>load them to the K4. I
> downloaded the K4win software but do not know<BR>how to connect from the
> K4 to the computer. What cables do I need? My<BR>computer does not have a
> MIDI connection.<BR><BR>Thanks in advance.<BR>yaros<BR><BR>--- In <A
> href="mailto:kawaisynths%40yahoogroups.com">kawaisynths@<WBR>yahoogroups.<WBR>com</A>,
> "Ronald Hawkins" <siregbert@.<WBR>..><BR>wrote:<BR>><BR>> I
> use K4win it works like a charm to edit any parameter in the K4, <BR>>
> and works as a decent patch librarian. You'll want to
> make sure that <BR>> you set up the Midi section of the software to use
> the midi ins and <BR>> outs that are connected to the K4, and set the
> channel number <BR>> (usually channel 1) that the K4 is going to send
> and receive sysex <BR>> messages on.<BR>> <BR>> I registered this
> shareware, I was so impressed with it. I think <BR>> registration used
> to be a requirement for editing the effect and drum <BR>> parameters
> but last time I downloaded it, it seemed to be fully <BR>> functional
> right off the bat without my having entered my <BR>> registration key.
> I'd suggest registering anyway, it's cheap, and <BR>> it's
> good.<BR>> <BR>> Sending and receiving sysex messages is as simple
> as using the Get <BR>> Patch, Get Bank, Send Patch, and Send Bank
> commands from the menu.<BR>> <BR>> --- In <A
> href="mailto:kawaisynths%40yahoogroups.com">kawaisynths@<WBR>yahoogroups.<WBR>com</A>,
> "ottiscan2" <l_husky@> wrote:<BR>> ><BR>>
> > Hi,<BR>> > <BR>> > I'm new to the group and new to
> editing and downloading to a K4 and <BR>> > will apolagize in
> advance for my lack of knowledge. If anyone can <BR>> > answer a few
> of my questions it would be a great help.<BR>> > <BR>> > I
> have recently been using a midi interface (midisport) to edit <BR>>
> > presets on my Bass Vamp Pro with its editing software and was
> <BR>> > wondering if it's as easy to edit presets on the K4?<BR>>
> > <BR>> > I have downloaded two K4 editors, K4win and the
> MidiQuest demo.<BR>> > <BR>> > Will these tools be enough to
> do some editing in the K4?<BR>> > <BR>> > Can I save the
> edits?<BR>> > <BR>> > How do you get sysex files from the
> computer to the K4?<BR>> > <BR>> > Are the memory cartridges
> for the K4 still available?<BR>> > <BR>> > Is it possilbe to
> get a Hammond (hope that's not a bad word) sound <BR>> > out
> of the K4?<BR>> > <BR>> > These are probably fairly basic
> questions for you veterans out <BR>> there <BR>> > but a mystery
> to me.<BR>> > <BR>> > I'm impressed with the K4's sound, I
> bought it for my daughter to <BR>> > practice piano on but have
> since thought I could encorporate it <BR>> into <BR>> > some the
> songs I'm playing with my band.<BR>> > <BR>> > Thanks so much
> for any help you can provide.<BR>> > <BR>> > Cheers,<BR>>
> > Lew<BR>> ><BR>><BR><BR></div></DIV><!--End group
> email --></BLOCKQUOTE><BR><BR><BR>Arrakis Crisis Web:
> <br>http://www.geocitie<wbr>s.com/alastor32/<wbr>Arrakis_Crisis.<wbr>html<p>
>
>
> <hr size="1"><br><font face="Verdana" size="-2">LLama Gratis a
> cualquier PC del Mundo.<br>Llamadas a fijos y m\ufffdviles desde 1 c\ufffdntimo por
> minuto.<br><a
> href="http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/">http://es.voice.<wbr>yahoo.com</a></font></p>
> </div>
>
> <!--~-|**|PrettyHtmlStart|**|-~-->
> <span width="1" style="color: white;"></span>
> <!--~-|**|PrettyHtmlEnd|**|-~-->
> </body>
> <!--~-|**|PrettyHtmlStart|**|-~-->
> <head>
> <style type="text/css">
> <!--
> #ygrp-mlmsg {font-size:13px; font-family:
> arial,helvetica,clean,sans-serif;*font-size:small;*font:x-small;}
> #ygrp-mlmsg table {font-size:inherit;font:100%;}
> #ygrp-mlmsg select, input, textarea {font:99%
> arial,helvetica,clean,sans-serif;}
> #ygrp-mlmsg pre, code {font:115% monospace;*font-size:100%;}
> #ygrp-mlmsg * {line-height:1.22em;}
> #ygrp-text{
> font-family: Georgia;
> }
> #ygrp-text p{
> margin: 0 0 1em 0;
> }
> #ygrp-tpmsgs{
> font-family: Arial;
> clear: both;
> }
> #ygrp-vitnav{
> padding-top: 10px;
> font-family: Verdana;
> font-size: 77%;
> margin: 0;
> }
> #ygrp-vitnav a{
> padding: 0 1px;
> }
> #ygrp-actbar{
> clear: both;
> margin: 25px 0;
> white-space:nowrap;
> color: #666;
> text-align: right;
> }
> #ygrp-actbar .left{
> float: left;
> white-space:nowrap;
> }
> .bld{font-weight:bold;}
> #ygrp-grft{
> font-family: Verdana;
> font-size: 77%;
> padding: 15px 0;
> }
> #ygrp-ft{
> font-family: verdana;
> font-size: 77%;
> border-top: 1px solid #666;
> padding: 5px 0;
> }
> #ygrp-mlmsg #logo{
> padding-bottom: 10px;
> }
>
> #ygrp-vital{
> background-color: #e0ecee;
> margin-bottom: 20px;
> padding: 2px 0 8px 8px;
> }
> #ygrp-vital #vithd{
> font-size: 77%;
> font-family: Verdana;
> font-weight: bold;
> color: #333;
> text-transform: uppercase;
> }
> #ygrp-vital ul{
> padding: 0;
> margin: 2px 0;
> }
> #ygrp-vital ul li{
> list-style-type: none;
> clear: both;
> border: 1px solid #e0ecee;
> }
> #ygrp-vital ul li .ct{
> font-weight: bold;
> color: #ff7900;
> float: right;
> width: 2em;
> text-align:right;
> padding-right: .5em;
> }
> #ygrp-vital ul li .cat{
> font-weight: bold;
> }
> #ygrp-vital a {
> text-decoration: none;
> }
>
> #ygrp-vital a:hover{
> text-decoration: underline;
> }
>
> #ygrp-sponsor #hd{
> color: #999;
> font-size: 77%;
> }
> #ygrp-sponsor #ov{
> padding: 6px 13px;
> background-color: #e0ecee;
> margin-bottom: 20px;
> }
> #ygrp-sponsor #ov ul{
> padding: 0 0 0 8px;
> margin: 0;
> }
> #ygrp-sponsor #ov li{
> list-style-type: square;
> padding: 6px 0;
> font-size: 77%;
> }
> #ygrp-sponsor #ov li a{
> text-decoration: none;
> font-size: 130%;
> }
> #ygrp-sponsor #nc {
> background-color: #eee;
> margin-bottom: 20px;
> padding: 0 8px;
> }
> #ygrp-sponsor .ad{
> padding: 8px 0;
> }
> #ygrp-sponsor .ad #hd1{
> font-family: Arial;
> font-weight: bold;
> color: #628c2a;
> font-size: 100%;
> line-height: 122%;
> }
> #ygrp-sponsor .ad a{
> text-decoration: none;
> }
> #ygrp-sponsor .ad a:hover{
> text-decoration: underline;
> }
> #ygrp-sponsor .ad p{
> margin: 0;
> }
> o {font-size: 0; }
> .MsoNormal {
> margin: 0 0 0 0;
> }
> #ygrp-text tt{
> font-size: 120%;
> }
> blockquote{margin: 0 0 0 4px;}
> .replbq {margin:4}
> -->
> </style>
> </head>
> <!--~-|**|PrettyHtmlEnd|**|-~-->
> </html><!--End group email -->
>
>
> --0-349587307-1178693132=:21878--Message
Re: [kawaisynths] Re: Noobie in need of advice.
2007-05-10 by Dennis Rowand
Attachments
- No local attachments were found for this message.