Korg Poly800/EX800 Users

Hi Narfman,
So, here you are!
I uploaded it to Rapidshare (thank you Marco Andreetta!). Perhaps not 
the most convenient, but free and without registration, so I could do 
it quickly.
Here's the download link:

http://rapidshare.com/files/24258106/Poly800II_manual.pdf.html

I personally own Poly 800 MkI and got the instruction for MkII at 
some time only for comparison. Therefore I am not that familiar with 
it. But there's definitely more on MIDI implementation inside it. I 
hope it will help you though. And I wish you good luck with the 
restoration of your Poly MkII.
Best regards
Marcin




--- In korgpolyex@yahoogroups.com, "narfman96" <narfman96@...> wrote:
>
> Hi Marcin,
> 
>   Thanks for the quick reply and the offer! YouSendIt.com is the 
one 
> S-H I see most often. They've never hassled me after registering. I 
> don't think my Yahoo account allows more the 10 MB at a time. The 
> file area here is 100mb now if you wanted to post it in the files 
> section for a while and then take it down that would probably be 
cool 
> too. Is there a lot more to the manual than the first edition?
> 
>   Right now I've cleaned all the buttons and pots after 
disassembling 
>  the whole synth. I cleaned and lubed the joystick thinking maybe 
> that is the source of the midi CC chatter. I replaced the corroded 
> (but not the board, whew!) battery with a nice gold contact holder 
> and fresh CR2032. Next all the keys need cleaning.  2 "F" keys are 
> not working and the "G4" key is snapped off but still works. Dust 
> Bunnies have been multiplying in the puppy for years for sure. 
> 
> Thanks again, Narfman  
> 
> --- In korgpolyex@yahoogroups.com, "mr_shtootzky" <sztucki@> wrote:
> >
> > I've got one in PDF. It's about 25 MB in size. I could try to 
send 
> it 
> > to you tomorrow via e-mail, if it gets through, or maybe upload 
it 
> to 
> > some sharing host. Any recommendations, by the way?
> > Best regards.
> > Marcin
> > 
> > --- In korgpolyex@yahoogroups.com, "narfman96" <narfman96@> wrote:
> > >
> > > Hi,
> > > 
> > >   Does anyone know if there is a Poly-800 II manual? If so does 
> > > anyone have a PDF copy? 
> > > 
> > >   I just picked up one that needs some work but I was able to 
get 
> a 
> > > really good bank of sounds from it using a combination of 
> Midiquest 
> > > 9.1 and Midi-Ox so I have the sysex. I can load the factory 
> presets 
> > > and 2 or 3 other banks I found using Midi-Ox. The synth sends 
> > > everything at once but my Midiman USB was up to the task. The 
> other 
> > > question I have is it sends random breath controller and 
> modulation 
> > > messages every 5 to 15 seconds. Is this normal? The values are 
0 
> > but 
> > > it constantly sends them unless doing a sysex transfer. Also 
> > > Midiquest will not let me edit the banks because the parameters 
> are 
> > > the same for every patch. Even though if I load the bank back 
in 
> > all 
> > > the sounds are right. Weird!!! I e-mailed the MQ support guru 
on 
> > > this. Does this mean there isn't an editor for this great 
> synth?????
> > > 
> > > Stay tuned I have to go to the hospital to see my new grandson!
> > > 
> > > Thanks for any insight, Narfman
> > >
> >
>