Korg Poly800/EX800 Users

Hi Marcin,

Since Yahoo has expanded the storage on our group to 100M bytes, you
could upload the file to the files section of our group.

Mike.

--- In korgpolyex@yahoogroups.com, "mr_shtootzky" <sztucki@...> wrote:
>
> Hi Narfman,
> So, here you are!
> I uploaded it to Rapidshare (thank you Marco Andreetta!). Perhaps not 
> the most convenient, but free and without registration, so I could do 
> it quickly.
> Here's the download link:
> 
> http://rapidshare.com/files/24258106/Poly800II_manual.pdf.html
> 
> I personally own Poly 800 MkI and got the instruction for MkII at 
> some time only for comparison. Therefore I am not that familiar with 
> it. But there's definitely more on MIDI implementation inside it. I 
> hope it will help you though. And I wish you good luck with the 
> restoration of your Poly MkII.
> Best regards
> Marcin
> 
> 
> 
> 
> --- In korgpolyex@yahoogroups.com, "narfman96" <narfman96@> wrote:
> >
> > Hi Marcin,
> > 
> >   Thanks for the quick reply and the offer! YouSendIt.com is the 
> one 
> > S-H I see most often. They've never hassled me after registering. I 
> > don't think my Yahoo account allows more the 10 MB at a time. The 
> > file area here is 100mb now if you wanted to post it in the files 
> > section for a while and then take it down that would probably be 
> cool 
> > too. Is there a lot more to the manual than the first edition?
> > 
> >   Right now I've cleaned all the buttons and pots after 
> disassembling 
> >  the whole synth. I cleaned and lubed the joystick thinking maybe 
> > that is the source of the midi CC chatter. I replaced the corroded 
> > (but not the board, whew!) battery with a nice gold contact holder 
> > and fresh CR2032. Next all the keys need cleaning.  2 "F" keys are 
> > not working and the "G4" key is snapped off but still works. Dust 
> > Bunnies have been multiplying in the puppy for years for sure. 
> > 
> > Thanks again, Narfman  
> > 
> > --- In korgpolyex@yahoogroups.com, "mr_shtootzky" <sztucki@> wrote:
> > >
> > > I've got one in PDF. It's about 25 MB in size. I could try to 
> send 
> > it 
> > > to you tomorrow via e-mail, if it gets through, or maybe upload 
> it 
> > to 
> > > some sharing host. Any recommendations, by the way?
> > > Best regards.
> > > Marcin
> > > 
> > > --- In korgpolyex@yahoogroups.com, "narfman96" <narfman96@> wrote:
> > > >
> > > > Hi,
> > > > 
> > > >   Does anyone know if there is a Poly-800 II manual? If so does 
> > > > anyone have a PDF copy? 
> > > > 
> > > >   I just picked up one that needs some work but I was able to 
> get 
> > a 
> > > > really good bank of sounds from it using a combination of 
> > Midiquest 
> > > > 9.1 and Midi-Ox so I have the sysex. I can load the factory 
> > presets 
> > > > and 2 or 3 other banks I found using Midi-Ox. The synth sends 
> > > > everything at once but my Midiman USB was up to the task. The 
> > other 
> > > > question I have is it sends random breath controller and 
> > modulation 
> > > > messages every 5 to 15 seconds. Is this normal? The values are 
> 0 
> > > but 
> > > > it constantly sends them unless doing a sysex transfer. Also 
> > > > Midiquest will not let me edit the banks because the parameters 
> > are 
> > > > the same for every patch. Even though if I load the bank back 
> in 
> > > all 
> > > > the sounds are right. Weird!!! I e-mailed the MQ support guru 
> on 
> > > > this. Does this mean there isn't an editor for this great 
> > synth?????
> > > > 
> > > > Stay tuned I have to go to the hospital to see my new grandson!
> > > > 
> > > > Thanks for any insight, Narfman
> > > >
> > >
> >
>