Korg Poly800/EX800 Users

Thanks for that Pan i'm inside the poly now but I dont seem to be able to find them I dont suppose you remember there vr numbers do you or what board they were on?
Thanks for all your help so far

--- In korgpolyex@yahoogroups.com, "Pan Ryba" <pan.ryba@...> wrote:
>
> Hi there.
> There is a tuning pot Inside your poly 800.
> actually there are two as I remember ... (coarse and fine)
> CHeck them. but be carefull.
> If you turn that pot too far (too low), poly 800 will reset due low power input and it will erase all your stored patches. so backup your sounds first!
> There is a second thing:
> tuning poly 800 this way will (maybee, I'm not sure) cause that your 
> joystick will bend tones in different ranges as now.
> there are pots for joystick bending range too.
> 
> 
> --- In korgpolyex@yahoogroups.com, "mr_rona" <mr_rona@> wrote:
> >
> > The tuner slider will only tune about half a semitone so wont tune up the 3 semitones its out and i took the joystick out and check the pots and there fine I even connected some new ones but no difference but thanks for the suggestions so far.
> > 
> > --- In korgpolyex@yahoogroups.com, "mr_rona" <mr_rona@> wrote:
> > >
> > > I love my korg poly 800 but its now out of tune at the moment its 3 semitones down I was told it was the joystick but I cant see it because it is always 3 semitones down, I was just wondering if anyone else has had the same problem or any solutions.
> > > thanks
> > >
> >
>