Korg Poly800/EX800 Users

It's all in the service manual which can be downloaded from the group archives(try the files section). There is a calibration routine for the joystick, written in the service manual. Have a go yourself first at reading the schematic and trying to understand what's happening. It's more rewarding to do it this way. Nothing better than figuring something out yourself, but, if you get stuck you can come back here and ask some more questions.



________________________________
 From: mr_rona <mr_rona@...>
To: korgpolyex@yahoogroups.com 
Sent: Thursday, 7 June 2012, 12:31
Subject: [korgpolyex] Re: Question for the group
 

  
Thanks for that Pan i'm inside the poly now but I dont seem to be able to find them I dont suppose you remember there vr numbers do you or what board they were on?
Thanks for all your help so far

--- In korgpolyex@yahoogroups.com, "Pan Ryba" <pan.ryba@...> wrote:
>
> Hi there.
> There is a tuning pot Inside your poly 800.
> actually there are two as I remember ... (coarse and fine)
> CHeck them. but be carefull.
> If you turn that pot too far (too low), poly 800 will reset due low power input and it will erase all your stored patches. so backup your sounds first!
> There is a second thing:
> tuning poly 800 this way will (maybee, I'm not sure) cause that your 
> joystick will bend tones in different ranges as now.
> there are pots for joystick bending range too.
> 
> 
> --- In korgpolyex@yahoogroups.com, "mr_rona" <mr_rona@> wrote:
> >
> > The tuner slider will only tune about half a semitone so wont tune up the 3 semitones its out and i took the joystick out and check the pots and there fine I even connected some new ones but no difference but thanks for the suggestions so far.
> > 
> > --- In korgpolyex@yahoogroups.com, "mr_rona" <mr_rona@> wrote:
> > >
> > > I love my korg poly 800 but its now out of tune at the moment its 3 semitones down I was told it was the joystick but I cant see it because it is always 3 semitones down, I was just wondering if anyone else has had the same problem or any solutions.
> > > thanks
> > >
> >
>