Re: [korgpolyex] The kits have been shipped!
2008-05-02 by Marcus Wilson
hey thats no way to look at it!$!$ i am the lucky last im getting a pair of superduperfrantagolous polyhawk800 s!@$!@$!@$ yeaahh!!!!! Marcus
Messages
Browse messages
Page 90 of 141 · 7050 messages matched
The kits have been shipped!
2008-05-02 by korgpolyex800
Lars Tornkvist, Marcus Wilson, Joe Clifford and Everett Newton - your kits have been shipped. Everett should get his first, not sure of the order of the rest
Re: Kits will be shipped out on Friday
2008-05-01 by korgpolyex800
Hi Marcus, sorry for the delay. Hopefully the mail system will be faster than me. Mike
Re: [korgpolyex] Kits will be shipped out on Friday
2008-05-01 by Marcus Wilson
heyaa!@$!@$!@ awesome!! cant wait the iron was on pre-heat but started to smell a bit so i turned it off for now ;-) best regards, Marcus
Kits will be shipped out on Friday
2008-05-01 by korgpolyex800
Lars Tornkvist, Marcus Wilson, Joe Clifford and Everett Newton - your kits are sitting right next to me, all boxed up and ready to go out on Friday morning.
Re: [korgpolyex] Correct components & wiring for Moog Slayer mod?
2008-04-27 by David Mochen
Hi Use the Moog Slayer scheme. Results are worth it. Dave ... From: alyerpal To: korgpolyex@yahoogroups.com Sent: Friday, April 25, 2008 6:34 PM Subject:
Re: Correct components & wiring for Moog Slayer mod?
2008-04-26 by funkymonkeypeter
Of the two schematics provided by Olaf you probably want to follow the moog slayer one. The other one simply duplicated the factory trim pots to the front
Correct components & wiring for Moog Slayer mod?
2008-04-25 by alyerpal
Hi all, I just picked up a Poly-800 for $100 that already seems to have the mod done - there are two (knobless) pots above the joystick that seem to control
Delay-Mod Howto
2008-04-25 by belochim
Hi Poly-Fans, I know this might be a little off topic now but I ve read in this User Group that there is a reverb/delay mod (don t know which anymore but any
Re: Well may be...
2008-04-21 by korgpolyex800
Atom, you hit the punch line right at the end. My initial kit is going to provide MIDI control over everything that is in the Poly 800 right now. As of today,
Re: Well may be...
2008-04-21 by Jim Gourgoutis
... any ... module. ... Speaking of which, is it possible to convert a Poly 800 MkII to a table-top unit w/o keyboard (basically an EX800)? I m wondering if I
Re: [korgpolyex] Re: Well may be...
2008-04-21 by Atom Smasher
... =================== for me, it depends on how much zipper there would be. for someone who wants *real* analog, even 14-bits isn t enough resolution to make
Re: Well may be...
2008-04-21 by patrioticduo
Don t get me wrong, I am definitely going to TRY to duplicate your mod s with digital pots. I just don t know how long it s going to take for me to get to
Re: [korgpolyex] Re: Well may be...
2008-04-21 by Atom Smasher
... i was thinking of converting my EX800 into a 1U rack, and not having any knobs on it. i may still build it into a new case, but without midi control over
Re: Well may be...
2008-04-21 by korgpolyex800
Hi Atom, I ve been looking at the youtube videos of the Atom mod s and I don t think my second kit is going to match the performance of a pot in real time. So
Re: [korgpolyex] Well may be...
2008-04-20 by Atom Smasher
... ============= i haven t ordered yet, as i m waiting for the second half of your mod to be available. what s the status of that? would you recommend
Re: [korgpolyex] Delay in shipping Hawk-800 kits
2008-04-20 by Marcus Wilson
awesome thanks for the update@!$!@$ my iron is on preheat already ;-) best regards, marcus
Delay in shipping Hawk-800 kits
2008-04-20 by korgpolyex800
To all of you who are still waiting for your Hawk-800 kit to arrive. I apologize for not having shipped them yet. The delay is caused by one of my suppliers
How do i do these other mods?
2008-04-19 by funkymonkeypeter
Anyone got any schematics for the Audio IN and FM Input selection mods shown here (at the bottom of the page)? http://www.circuitbenders.co.uk/synthmod2.html
Well may be...
2008-04-17 by korgpolyex800
I think there should be another batch but I can t guarantee it. ... afford to spend the money at
Re: Ten new boards just arrived
2008-04-16 by Phoebe
Thanks, Mike. Will there be another batch? I m not sure if I can afford to spend the money at the moment, but if there won t be any more, I ll order it. Phoebe
Re: Ten new boards just arrived
2008-04-16 by korgpolyex800
Hi Phoebe, You can go to: http://patrioticduo.tripod.com/korgpoly800ex800mkiii/buythekit.html and click on the Buy Now button for the kit that you want. Choose
DEMF huh...
2008-04-15 by John Boys
nice 1 bruv! i havent built mine yet. the busy season is starting at my work... theres no time. i might just have it done by the guy i send all my stuff to.
Re: Ten new boards just arrived
2008-04-15 by Phoebe
... Hey Mike...sorry if this is a repeat question, but how much are the kits, and how do we go about ordering them? Thanks, Phoebe/october71
Re: [korgpolyex] Have you had a chance to build the kit - yet?
2008-04-14 by darkcube
not yet. scrambling to finish a couple more tracks in time for DEMF, as i just got booked to do a live PA on the underground stage, sunday afternoon.
Ten new boards just arrived
2008-04-14 by korgpolyex800
So with the ten boards arriving, I can now ship out the rest of the already ordered six kits and can take orders for another four before I order another ten
Have you had a chance to build the kit - yet?
2008-04-14 by korgpolyex800
Re: [korgpolyex] Hawk-800 kit construction and installation instructions
2008-04-04 by darkcube
... mine came in the mail, while i was in miami for WMC. thanks much! --darkcube [ detroit techno militia / uberhax0r ] --email : darkcube@datavibe.net / AOL
Hawk-800 kit construction and installation instructions
2008-04-04 by korgpolyex800
I ve finally managed to finish the Hawk-800 kit construction and installation instructions. Three kits have been shipped out and I know that one arrived and am
Re: Sequencer transpose now working
2008-04-02 by zoinky420
... THAT would be awesome. As I was reading the Q&A I thought about how cool it would be if you could rig a simple arpeggiator into the sequencer and then a
A little update on sequencer transpose
2008-04-02 by korgpolyex800
As of this evening, the Poly 800 transposes via the keyboard and MIDI if desired and the EX800 can also do sequencer transposition via MIDI. Mike.
Another little sequencer transpose update
2008-04-02 by korgpolyex800
So the question was: Q) will you be able to control this sequence transposition via midi input in the case of the ex-800? And my answer this morning was: A) At
Re: Sequencer transpose now working
2008-04-01 by korgpolyex800
John, First of all, congratulations on receiving your kit. Since you might be the first person other than myself to attempt the construction and installation
Re: Sequencer transpose now working
2008-04-01 by korgpolyex800
It would be great to be able to increase the tempo to 2400BPM but the 8 bit CPU would never be able to keep up. So unfortunately, this is one feature we just
Re: Sequencer transpose now working
2008-04-01 by bys_jhn
thats awesome news... i would like to see development continue in this area. i think since the poly its self is a vanilla instrument so to speak, the more you
Re: Sequencer transpose now working
2008-04-01 by zoinky420
... it ... sequencer. ... Yeah that s a useful feature. I havent used the Poly 800 sequencer yet, but if you can tweak it here s something to consider: if it
Re: [korgpolyex] Tremolo demonstration video
2008-03-30 by Epiik Soul
Nice job on the tremolo! xxLUCIF3Rxx On Mar 29, 2008, at 2:56 PM, korgpolyex800 wrote: Hi all, for those you that are interested, I
Sequencer transpose now working
2008-03-30 by korgpolyex800
Yes, I thought you would all love to hear that today I implemented a sequencer key transpose function. Now you can shift your recorded sequence up according to
Re: stuck in sequencer mode similar to displaying "7- P"
2008-03-30 by korgpolyex800
Moe, I very much doubt the problem will be CPU itself. Since this last email to you I sent another that told of how I fixed one of my other Poly 800 s that had
Re: stuck in sequencer mode similar to displaying "7- P"
2008-03-30 by m.sislack
Hi mike :) I put the project aside for a while. I again made sure, that I had the right voltages in the circuit but since I´m not a so much experienced
Re: [korgpolyex] Hawk-800 kit update
2008-03-30 by Marco Andreetta
Thank you Mike, can t wait for the kit to arrive! --- Dom 30/3/08, Lars Törnkvist ha scritto: Da: Lars Törnkvist
Re: [korgpolyex] Hawk-800 kit update
2008-03-30 by Lars Törnkvist
Nice, nice It will be very interesting to see how this works out for the lucky kit receivers. I hope you guys/gals don t mind sharing your experience with the
Re: Has anyone tried...
2008-03-30 by rzakrin
... with an extra wire, from C103 s negative lead... so I put that on a pot with a wire from vr3, the bottom right pad just above c25. when I turn that knob,
Tremolo demonstration video
2008-03-29 by korgpolyex800
Hi all, for those you that are interested, I did a video demonstrating the tremolo capabilities of the Hawk-800 kit. Check it out at
Hawk-800 kit update
2008-03-29 by korgpolyex800
A little update, I shipped the first two kits out today. Marco, sorry but yours will be shipped on Tuesday. The ten additional boards are still in production
SOLVED !Re: Newbie Question on No Power
2008-03-29 by dniedziejko
Funky Monkey helped me fix this one through IM !!! Talked me through the issue - now it s up and running! Thank you korgpolyex!!! You guys - and Funky Monkey
Newbie Question on No Power
2008-03-28 by dniedziejko
Hey Guys, Not a super experienced technician -- but I do love the Poly 800. My band has grown dependant on the sounds I ve modified along the way. No number
Re: Moog Slayer mod - question
2008-03-18 by patrioticduo
I m glad there are other sane people on this list that can help me get through life. Those are the samples I have. LOL - I will get to work on it straight
Re: [korgpolyex] Moog Slayer mod - question
2008-03-17 by Atom Smasher
... =============== that seems to be a fair assessment. ... ================ yeah, that should work, although it would have limited resolution. at higher
Re: Moog Slayer mod - question
2008-03-17 by narfman96
The Maxim DS1660 is bipolar +/- 5 volt. Will this work? I read the Max5160 datasheet could it be used with an op amp for feedback control? ... audio ... again,