Re: [korgpolyex] Digest Number 65
2002-01-08 by Lee Mulvogue
> Subject: Re: How can I connect my Poly 800 to my pc? One thing you might want to check is which cable you are connecting to which port - on my MIDI cable, the "IN" cable is actually MIDI IN TO THE PC - ie., it goes in the MIDI OUT on the poly. Might just want to check how yours is set up. Oh yeah, none of my photos of my poly800 have turned out - didn't realise untill much later that I was using an "outdoor use only" disposable camera, thought I had plenty of light, obviously not... I even managed to line the beasty up next to a Nord Lead 2 (hehe, colours are identical...), but alas I won't have that chance again... Shall try to get a "proper" camera and rip off a roll... On another note, anyone know exactly what happens in the "stereo" phase of the poly? As far as I know it only has a single signal line most of the way through, so I assume there's some sort of "stereoification" stage? I was thinking about patching out before this phase, going through a delay (or any other mono processor), then continuing through the rest, so as not to lose the stereo? cya LM http://www.baudalign.com