Yahoo Groups archive

The Logic Off Topic list

Index last updated: 2026-04-28 23:27 UTC

Message

Re: OT: Hammerfall Questions

2000-03-01 by Gilles Ruppert

Hi Murray!
I personally chose the Fostex VC-8. It is 20 bit, up to 96 kHz. You can look
up further Spec at
http://www.fostex.co.jp/int/pages/products/access/cop2.htm.
The quality of these converters is good enough for me. It has 8 I/O in Cinch
(asymetrical), Adat I/O (lightpipe) and a Wordclock in. I bought them in
Germany for 599 DM (ca. 194\ufffd, 309$). You also get symmetrical converts but
they are nearly the double price, and I personnally do not have any cables
exceding 5 meters and I have no problems with hum etc. My testing till now
just says: What a great card and that the converters are also very good,
looking at the price (IMO, they are not worse than those of the Motu 2408,
and better than those of the Terratec EWS 88 MT)
Hope this helps,
Gilles

> From: Murray McDowall <murraymc@...>
>
> I am interested in the Hammerfall too -- I would be interested to know
what
> a/d d d/a interfaces Hammerfall owners are going for. I don't have a
> digital mixer or ADAT/DA88 unit so I would be looking at banks of
> converters liket the RME 8x8 or similar. Any recommendations on cost vs
> quality would be much appreciated. BTW I assume that the digital mixer
> route is more expensive -- is there any compelling reason to do this if
you
> basically want this setup as a front end for Logic?

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.