Yahoo Groups archive

The Logic Off Topic list

Index last updated: 2026-04-28 23:27 UTC

Thread

Re: [L-OT] Digest Number 1295

Re: [L-OT] Digest Number 1295

2005-12-13 by Dave Abbott

> ________________________________________________________________________
>
> Message: 6
>    Date: Tue, 13 Dec 2005 16:52:28 +0100
>    From: Peter Ostry <po@...>
>
> > I have a Shure 16A
> > condenser on the hihat and can't keep the rest of the kit out of it no
> > matter what gating I do
>
> I have no experience with miking drumsets but... (well, I could stop
> at this point right now, eh? :-)
>
> ...according the the description the 16A is a cardioid. If you cannot
> gate it with the other mics, even if the drummer does not play kick,
> snare and hihat at once - does it probably aim to the kit or is it
> too far away from the hihat? Should be rather close and aiming to the
> outside if possible. That can be a problem with a furious drummer
> though...

The 16A is a condenser with a cardiod pattern as you say but I still can't
get enough separation with it even when it's right up against the hihat, I
even tried to put a little tube around it to stop it picking up  outside
sounds(without blocking the vents),, nothing doing,,,,hmmmmm

Cheers

Dave

DaStudio
Johannesburg
South Africa

Re: [L-OT] Digest Number 1295

2005-12-13 by Peter Ostry

On 13.12.2005, at 21:16, Dave Abbott wrote:

>>> I have a Shure 16A
>>> condenser on the hihat and can't keep the rest of the kit out of  
>>> it no
>>> matter what gating I do
>>
>> I have no experience with miking drumsets but... (well, I could stop
>> at this point right now, eh? :-)
>>
>> ...according the the description the 16A is a cardioid. If you cannot
>> gate it with the other mics, even if the drummer does not play kick,
>> snare and hihat at once - does it probably aim to the kit or is it
>> too far away from the hihat? Should be rather close and aiming to the
>> outside if possible. That can be a problem with a furious drummer
>> though...
>
> The 16A is a condenser with a cardiod pattern as you say but I  
> still can't
> get enough separation with it even when it's right up against the  
> hihat, I
> even tried to put a little tube around it to stop it picking up   
> outside
> sounds(without blocking the vents),, nothing doing,,,,hmmmmm

Vibrations?

___
Peter Ostry



[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.