Lpc2000

----- Original Message ----- 
From: "pfwilliamsmts" <pfwilliams@...>
To: <lpc2000@yahoogroups.com>
Sent: Tuesday, November 08, 2005 6:33 PM
Subject: [lpc2000] Can I run the core voltage at 1.5 volts


>I am starting a new design with the LPC2106. I will also have an FPGA
> running at 1.5 volts. I would like to use the 1.5 volts for the LPC
> core voltage. The data sheet shows a some range in the core voltage
> but I have not seen any other postings in this regard. Does anyone
> have experience with this topic.

FPGAs can take very large peak currents, several amps in many cases. It 
would be a good idea to have separate regulators.

Leon 

---
[This E-mail has been scanned for viruses but it is your responsibility 
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]