Lpc2000

Peter,

yes,  the Hyperterm program is closed, and Flash ISP utility is the 
only program was running at the time.

Also you mentioned about the TERATERM, what is this program, and 
where can i get it?

-------------

--- In lpc2100@yahoogroups.com, Peter Jakacki <cyb@i...> wrote:
> 
> clapper wrote:
> > 
> > Did you mean pin 14 (p0.1)? I'm pretty sure that's the pin (as 
well as
> > DBGSEL) that need to be pulled low. I don't think P0.14 pin 44 - 
is
> > used for flash programming. Assuming that's correct, I can't 
imagine
> > why you can't connect with the flash isp - if you can connect with
> > hyperterminal using the same cable. It should work.
> 
> User manual states:
> "A LOW level after reset at the P0.14 pin is considered as the 
external
> hardware request to
> start the ISP command handler."
> 
> I hope nmitech has released the port by disconnecting hyperterminal.
> About terminal emulators in general, hyperterminal is a very basic
> terminal and you don't want to be caught using it, somebody might 
think
> that you are a newbie ;). 
> 
> As a suggestion, try using teraterm, it's free, and it works very 
well.
> 
> 
> Peter Jakacki