Lpc2000

Hi Joel,

I did write my own bootloader and programmed in sector 0. So I did not 
replace the philips bootloader, but just added an extra bootloader. 
Sorry, but I cannot share the source. Because the flash hardware is not 
documented, you would have to reverse engineer the philips bootloader to 
write a replacement.

I would like it if philips would create some kind of bootloader 
extension interface, so you could add your own IO routines to the 
bootloader. I would immagine this could work like the PC BIOS extension 
interface: the PC BIOS looks every 16KB boundary for a ROM signature and 
calls the ROM extension if a signature is found.

Richard Duits



Joel Winarske wrote:

> Has anyone replaced the LPC214x boot loader with their own code? If so how
> much of a hassle is it?
>
> Is Phillip's planning on coming out with a boot loader upgrade to support
> USB?  Perhaps via CDC serial emulation, similar to the Atmel?  This would
> require no change to their PC software, and no PC side driver.
>
>
> Joel
>
>
>
>
> SPONSORED LINKS
> Microprocessor 
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=tsVC-J9hJ5qyXg0WPR0l6g> 
> 	Microcontrollers 
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=DvJVNqC_pqRTm8Xq01nxwg> 
> 	Pic microcontrollers 
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=TpkoX4KofDJ7c6LyBvUqVQ> 
>
> 8051 microprocessor 
> <http://groups.yahoo.com/gads?t=ms&k=8051+microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=1Ipf1Fjfbd_HVIlekkDP-A> 
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
>     *  Visit your group "lpc2000
>       <http://groups.yahoo.com/group/lpc2000>" on the web.
>        
>     *  To unsubscribe from this group, send an email to:
>        lpc2000-unsubscribe@yahoogroups.com
>       <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     *  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>