Yahoo Groups archive

Lpc2000

Index last updated: 2026-04-28 23:31 UTC

Message

Re: [lpc2000] uC hangs when initialising external interrupt

2005-11-28 by Rob Jansen

>     Ik doe het maar in het nederlands he?
>
>    Ik gebruik een evaluation board van Keil, kortom ik kan zo 123 geen
> errata vinden. Bij de leverbon staat niks vermeld van wat voor
> controller er op zit...
>
>    Heb jij enig idee hoe ik daarachter kom (via uitlezen ID of zo??)

Laurens,

with a good light source (e.g. Halogen lamp) you can just read the small
print on the device.
If you look on the product information page at the Philips website
(http://www.semiconductors.philips.com/pip/LPC2119.html for the lpc2129)
you will find an errata sheet almost at the bottom of the page under
"Support & tools". That document also describes what to look for.

Good luck,

Rob

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.