Lpc2000

Michael Rubitschka wrote:

> Dear Jim
>
> Your Eclipse-Arm tutorial is magnificent.
> Thank you verry much for this great
> work.
>
> Cheers
> Michael


I think we all can agree on that. Superb!

/Ake

>
>
> >From: "lynchzilla" <lynchzilla@...>
> >Reply-To: lpc2000@yahoogroups.com
> >To: lpc2000@yahoogroups.com
> >Subject: [lpc2000] Re: JTAG Programmer Confusion - Noob Question
> >Date: Sun, 04 Dec 2005 16:20:59 -0000
> >
> >May I add some additional points about the wiggler-jtag isssue.
> >
> >I wrote a tutorial titled "ARM Cross Development with Eclipse" that
> >is referenced in the "links" section of this message board. This
> >tutorial shows in excessive detail how to set up a free GNU compiler
> >set for the ARM using the Eclipse/CDT IDE and how to use the Eclipse
> >debugger with the wiggler. Hopefully, you have had a look at that.
> >
> >The obvious shortcoming is that it couldn't debug in FLASH memory.
> >
> >I'm now furiously working on a revision to this tutorial that does
> >show how to debug in FLASH. Thanks to the genius of my new co-
> >author, Norwegian engineer Kjell Eirik Andersen, we now have a
> >simple utility program, RSPBreakout.exe, that reads all commands
> >intended for the Macraigor OCDRemote and converts all Z0,addr,length
> >commands (software breakpoints) into Z1,addr,length commands
> >(hardware breakpoints). As long as you limit yourself to setting no
> >more than two breakpoints at a time, it will properly break in FLASH
> >and all single-stepping, variable inspection, etc works
> >magnificently. This requires Macraigor's OCDRemote version 2.14
> >which supports -Z2 GDB remote serial protocol commands.
> >
> >Not the ultimate solution, but a great breakthrough for a completely
> >free development system nonetheless.
> >
> >One last point, I can get the Olimex Wiggler to run at speed 3 (140
> >khz) using the latest OCDRemote ver 2.14
> >
> >However, I found that certain Windows applications, such as my
> >beloved SKYPE internet phone system, used so much of my CPU
> >resources that the speed that the Wiggler could run was severely
> >degraded (to the lowest speed). I suggest that you bring up Windows
> >Task Manager and make sure that you don't have any applications like
> >that running. Remember that the OCDRemote/wiggler is ssentially "bit-
> >banging" the parallel port and this LPT1 port probably has a much
> >lower priority on the Windows driver pecking order.
> >
> >I hope to have the tutorial finished in the next several days. I'm
> >also hoping that the Eclipse foundation may accept my tutorial as an
> >official Eclipse Corner article.
> >
> >Cheers,
> >Jim Lynch
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> SPONSORED LINKS
> Microprocessor 
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=tsVC-J9hJ5qyXg0WPR0l6g> 
> 	Microcontrollers 
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=DvJVNqC_pqRTm8Xq01nxwg> 
> 	Pic microcontrollers 
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=TpkoX4KofDJ7c6LyBvUqVQ> 
>
> 8051 microprocessor 
> <http://groups.yahoo.com/gads?t=ms&k=8051+microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=1Ipf1Fjfbd_HVIlekkDP-A> 
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
>     *  Visit your group "lpc2000
>       <http://groups.yahoo.com/group/lpc2000>" on the web.
>        
>     *  To unsubscribe from this group, send an email to:
>        lpc2000-unsubscribe@yahoogroups.com
>       <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     *  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>


-- 
 ---
Ake Hedman (YAP - Yet Another Programmer)
eurosource, Brattbergavägen 17, 820 50 LOS, Sweden
Phone: (46) 657 413430 Cellular: (46) 73 84 84 102
Company home: http://www.eurosource.se      
Kryddor/Te/Kaffe: http://www.brattberg.com
Personal homepage: http://www.eurosource.se/akhe
Automated home: http://www.vscp.org



[Non-text portions of this message have been removed]