Lpc2000

Hi Danish,

Not dumb a *very good* suggestion. Not  dumb or not matters now. I will 
try every suggestion at this stage... Everyone who have done some 
projects know the feeling. Everything in place. The product  ready to be 
sent to the customer.... Just have to enable that tiny little thing 
also.....  ;-)

Back to work!
/Ake

dr_danish_ali wrote:

> Ok Ake, here's my dumb suggestion:
>
> Try enabling the watchdog, but just to interrupt not reset?
> You'll need an interrupt handler / VIC channel to do it - can you 
> spare one?
> That ISR need just raise a flag for now.
>
> Once the watchdog is fed and running happily, you might then be able 
> to enable resets on
> it.
>
> Hope this helps,
> Danish
>
> --- In lpc2000@yahoogroups.com, "Ake Hedman, eurosource" <akhe@b...> 
> wrote:
> >
> > I am still trying to solve my problems with the watchdog.
> >
> > I have now scaled away most stuff of my application and can see that 
> the
> > problem occurs when either of three interrupts occur (UART0/UART1/I2C0)
> > in the system. Without the watchdog everything works fine but if I
> > enable the watchdog everything crashes. I have tried to just enable and
> > trig one of the interrupts in turn but the situation is the same.
> >
> > I'm totally out of clues at the moment so any (also things that 
> might be
> > considered dumb) are very welcome.
> >
> > Regards
> > /Ake
>
>
>
>
>
> SPONSORED LINKS
> Microprocessor 
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=tsVC-J9hJ5qyXg0WPR0l6g> 
> 	Microcontrollers 
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=DvJVNqC_pqRTm8Xq01nxwg> 
> 	Pic microcontrollers 
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=TpkoX4KofDJ7c6LyBvUqVQ> 
>
> 8051 microprocessor 
> <http://groups.yahoo.com/gads?t=ms&k=8051+microprocessor&w1=Microprocessor&w2=Microcontrollers&w3=Pic+microcontrollers&w4=8051+microprocessor&c=4&s=93&.sig=1Ipf1Fjfbd_HVIlekkDP-A> 
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
>     *  Visit your group "lpc2000
>       <http://groups.yahoo.com/group/lpc2000>" on the web.
>        
>     *  To unsubscribe from this group, send an email to:
>        lpc2000-unsubscribe@yahoogroups.com
>       <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     *  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>


-- 
 ---
Ake Hedman (YAP - Yet Another Programmer)
eurosource, Brattbergavägen 17, 820 50 LOS, Sweden
Phone: (46) 657 413430 Cellular: (46) 73 84 84 102
Company home: http://www.eurosource.se      
Kryddor/Te/Kaffe: http://www.brattberg.com
Personal homepage: http://www.eurosource.se/akhe
Automated home: http://www.vscp.org



[Non-text portions of this message have been removed]