Lpc2000

Joel,

Did all that. Light is solid, rebooted machine, deleted & re-installed
latest driver from segger site, etc.  Figure the box is just fried?  It's
been in the dev-kit box unused for a year...but it was in a cool, dark,
ESD-controlled place.

From the error messages, it looks like jlink.exe is about to load the
firmware, but keeps getting bogus string sizes for the fw update.  Tried
several usb cables.  I just thought someone might of seen this, but if not,
I think I'll assume it's DOA.

Thanks,

Steve

> Message: 2         
>    Date: Tue, 13 Dec 2005 12:54:33 -0800
>    From: "Joel Winarske" <joelw@...>
> Subject: RE: J-Link errors on initial installation
> 
> Is green light solid or blinking?  If driver is not loaded it 
> will just
> blink.  The driver updates the J-Link firmware on the fly.  
> So you want to
> be working with the latest J-Link driver from Segger's website.
> 
> Are you restarting jlink.exe each time you reinsert your 
> J-link, or leaving
> it open?
> 
> The other thing you might want to do is power cycle your 
> machine with J-Link
> plugged in.  Then see if devmgmt.msc (shortcut from 
> start/run) is still
> happy.
> 
> 
> Joel
> 
> > Hi All,
> > 
> > Just plugged in a jlink for the first time.  Usb drivers 
> look good in
> > devman, and green light on unit is on, but I can't talk to 
> it; I thought
> > someone on the list might have seen the following errors before.
> > 
> > Thanks,
> > Steve
> > 
> > J-Link>usb 0
> > Connecting to J-Link via USB (Port: 0)
> > JTAG_GetFirmwareString: J-Link reports unsupported firmware 
> string size of
> > 26956
> >  (expected 112)
> > Could not identify firmware (Read failure)
> > J-Link>usb 1
> > Connecting to J-Link via USB (Port: 1)
> > Can not connect to J-Link via USB.
> > J-Link>usb 2
> > Connecting to J-Link via USB (Port: 2)
> > Can not connect to J-Link via USB.
> > J-Link>usb 3
> > Connecting to J-Link via USB (Port: 3)
> > Can not connect to J-Link via USB.
> > J-Link>usb 0
> > Connecting to J-Link via USB (Port: 0)
> > JTAG_GetFirmwareString: J-Link reports unsupported firmware 
> string size of
> > 27502
> >  (expected 112)
> > Could not identify firmware (Read failure)
> > J-Link>usb 0
> > Connecting to J-Link via USB (Port: 0)
> > JTAG_GetFirmwareString: J-Link reports unsupported firmware 
> string size of
> > 25376
> >  (expected 112)
> > J-Link>