Yahoo Groups archive

Lpc2000

Index last updated: 2026-04-28 23:31 UTC

Message

Re: [lpc2000] Re: LPC2138 Dev Board

2005-12-21 by Ake Hedman, eurosource

Dominic Rath wrote:

> Hello Ake,
>
> On Wednesday 21 December 2005 10:51, Ake Hedman, eurosource wrote:
> > Hi Dominic,
> >
> > Sounds very interesting! How far have you come in this development?
> > What remains to do?  Maybe I could help on some development...
> Currently, it's mostly testing and debugging - differents hosts, 
> targets, jtag
> interfaces. Stability and correctness are most important for a 
> debugger, so
> currently I'm writing small test cases, run them in target RAM, and 
> see if
> the state captured by the debugger is correct. What I'm interested in is
> people trying the software, and reporting problems they've experienced -
> development contributions are of course welcome, too.
> What's currently missing is flash write support, but that's easy to 
> add (for
> the LPCs), and MMU/Cache support, which isn't necessary for LPCs.
>
> >
> > So any FT232x based ARM board would do for this? Is the board
> > requirements documented somewhere.
> No, FT2232C, not FT232. The FT2232C comes with a multi-protocol 
> synchronous
> serial engine that can be configured as a JTAG TAP master. The 
> DLP2232M is an
> evaluation module available from FTDI (www.ftdichip.com), it comes 
> with the
> chip, a USB connector, eeprom, crystal, i.e. all the supporting 
> circuitry.
> The FT2232C has two I/O channels which accept either 3.3V or 5V logic 
> - USB
> runs at 5V, so if you want to debug 3.3V targets you simply supply the 
> chip
> with 3.3V from a voltage regulator powered by the USB. My diploma thesis
> (available at the project site openocd.berlios.de) contains schematics 
> for a
> very simple interface. I'll upload schematics for a more advanced design
> within the next days.
>
> >
> > /Ake
>
> Kind regards,
>
> Dominic


Hi Dominic,

OK now I see. I will try this out also found your diploma thesis which 
will be good reading for Christmas.

Cheers
/Ake


-- 
 ---
Ake Hedman (YAP - Yet Another Programmer)
eurosource, Brattbergavagen 17, 820 50 LOS, Sweden
Phone: (46) 657 413430 Cellular: (46) 73 0533 146
Company home: http://www.eurosource.se      
Kryddor/Te/Kaffe: http://www.brattberg.com
Personal homepage: http://www.eurosource.se/akhe
Automated home: http://www.vscp.org

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.