Lpc2000

Andrew,

Yes, I am interested.
I've got different boards to do this on, but no lpc2292.
I am currently interfacing the enc28j60 to my board. For my project I do
not need a full TCP stack, I was just asked to show that the enc28j60 is a
workable ethernet solution for a few other projects.

So all I _must_ do is to show a working MAC with the enc, but a full
tcp/ip solution may be so much easier to demo ...

I have the enc28j60 connected to SPI0 and use GCC.
Just drop me an email if you're interested - I can add the 28j60 driver.
I have also en Embedded Artists 2138 board with a DM7000 (10/100 Mb
Ethernet) and can maybe add that driver also.

Regards,

      Rob

> Hello,
>
> I'd ported OpenTCP to lpc2292 with rtl8019. I'll add cs8900 and enj28j60
> drivers. (All of them working with ported avrlib netstack with lpc2292, so
> it will be trivial.)
>
> I add a very basic and simple device structure, becouse i would like to
> use slip too, and then add ppp, etc...
>
> Somebody interested to help developing it? ;)
>
>
> Andrew