Lpc2000

Hi,
it's not null modem cabel that should be used with this board. You 
can make it by yourself. 
Take two connectors - DB9F for PC and DB9M for the board. Connect 
pins 2, 3 and 5 of the two connectors in this way:
2 <-> 2
3 <-> 3
5 <-> 5
then plug'n'play ;-)

Regards,
Max


--- In lpc2000@yahoogroups.com, "Anders Kjellberg" <akj@...> wrote:
>
> Hi,
> I'm trying to establish connection with Philips Flash Utility and 
an Olimex 2106 mt board without success. TheBSL jumper is shorted 
and the frequency set at 14745kHz (14.7456MHz). Different baudrates 
have been tried without success. I am not sure about the DTR/RTS 
settings however. Also I may be using the wrong RS232 cable. Null 
modem or not? I'll have to check that. I intend to use the 
bootloader and ICCARM. Any ideas that may help?
> 
> Thanks in advance!
> /Anders
> 
> [Non-text portions of this message have been removed]
>