Lpc2000

Thanks!
/Anders


--- In lpc2000@yahoogroups.com, "theothervmax" <vmax@...> wrote:
>
> Hi,
> it's not null modem cabel that should be used with this board. You 
> can make it by yourself. 
> Take two connectors - DB9F for PC and DB9M for the board. Connect 
> pins 2, 3 and 5 of the two connectors in this way:
> 2 <-> 2
> 3 <-> 3
> 5 <-> 5
> then plug'n'play ;-)
> 
> Regards,
> Max
> 
> 
> --- In lpc2000@yahoogroups.com, "Anders Kjellberg" <akj@> wrote:
> >
> > Hi,
> > I'm trying to establish connection with Philips Flash Utility 
and 
> an Olimex 2106 mt board without success. TheBSL jumper is shorted 
> and the frequency set at 14745kHz (14.7456MHz). Different 
baudrates 
> have been tried without success. I am not sure about the DTR/RTS 
> settings however. Also I may be using the wrong RS232 cable. Null 
> modem or not? I'll have to check that. I intend to use the 
> bootloader and ICCARM. Any ideas that may help?
> > 
> > Thanks in advance!
> > /Anders
> > 
> > [Non-text portions of this message have been removed]
> >
>