Lpc2000

Michal Krestan wrote:

>I need to help with programming LPC2106 via LPC2000 flash utility. I've got board with one LPC2106 connected via UART0 to COM1. P0.14 is pulled low, power supply pins are in limits but I can't sucesfully connect with flash utility. Always I get message "Cannot communicate with test board". X1 and X2 pins are connected to 7.3728MHz resonator. If I measure data between PC and LPC2106 it has some response on flash utility requests, but no success:-( I had several pcs of this hardware working, but this one doesn't work. I've changed LPC2106 with new one but still with the same result.  Does anybody have idea how to fix this problem?
>
>  
>
Well, you don't have to use any software to connect to the LPC2106.  All 
you really need is a terminal program, something like minicom or 
hypercom will work.  Just set them to 8 bits no parity and no 
handshake.  Then start pressing the "?" key, eventually, the processor 
will see the "?" and send you "Synchronized".  When it does that, you 
respond with the same thing: "Synchronized".  You are now linked.

TomW


>            Michal
>
>
>[Non-text portions of this message have been removed]
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>
>  
>


-- 
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net, http://cyberiansoftware.com
"Windows? No thanks, I have work to do..."
----------------------------------------------------