Lpc2000

Hi, I want to read an Eeprom 24LC515 provided by microchip with 2148.


To try, I want to use the Random Read operation after writing at a 
specific adress so I can know if memory work.

So I write at 0x0000 and all work fine.  

Now I want to Read at adress 0x0000.  

( I can't use Current read adress because the internal adress memory 
counter is now at 0x0001 ).

So I start by 

0x08 -> Send Control Byte. ( Write Mode )

0x18 -> Send Adress High Byte

0x28 ( First Time ) -> Send Adress Low Byte

0x28 ( First Time ) -> Here is the problem.

Hi set : 

I2C0CONSET = 0x10;  ( I set the Start byte )
I2C0DAT = 0xA1.  ( Control Byte.  Read Mode )

But If I do that I have 0x10 in I2CStat.

What I'm doing wrong.