Lpc2000

Hi Jerome,

> I want to read an Eeprom 24LC515 provided by microchip with 2148.
> 
> To try, I want to use the Random Read operation after writing at a 
> specific adress so I can know if memory work.
> 
> So I write at 0x0000 and all work fine.  
> 
> Now I want to Read at adress 0x0000.  
> 
> ( I can't use Current read adress because the internal adress memory 
> counter is now at 0x0001 ).
> 
> So I start by 
> 
> 0x08 -> Send Control Byte. ( Write Mode )
> 
> 0x18 -> Send Adress High Byte
> 
> 0x28 ( First Time ) -> Send Adress Low Byte
> 
> 0x28 ( First Time ) -> Here is the problem.
> 
> Hi set : 
> 
> I2C0CONSET = 0x10;  ( I set the Start byte )
> I2C0DAT = 0xA1.  ( Control Byte.  Read Mode )
> 
> But If I do that I have 0x10 in I2CStat.
> 
> What I'm doing wrong.

nothing. :-)
0x10 means "repeated start condition" and happens, when you send a
start without sending a stop before. that's exactly what you want to
do during read. I only wonder, why you sent the control byte in read
mode that early. I would expect it in state of 0x10.

I hope I could help you. I managed the random read, but still got some
problems with the sequential. let me know if it worked out.

Jan