Lpc2000

thanks for immediate reply.
Yes i am using external watch crystal of 32 khz. I have also found that i am not getting oscillation on that board(the board in which i am not getting RTC updaed value ). But when i used same crystal on other board it( crystal ) seems working,so crystal is fine.
What are the possible reason that i am not getting oscillation with working crystal
 
Regards,
Pandurang S.

________________________________

From: lpc2000@yahoogroups.com on behalf of Guillermo Prandi
Sent: Wed 3/22/2006 4:03 PM
To: lpc2000@yahoogroups.com
Subject: [lpc2000] Re: RTC problem in 2136


--- In lpc2000@yahoogroups.com, "Pandurang Shinde" <pandurang@...> 
wrote:
>
> Hi,
>           I am using LPC2136.I am facing some RTC related problems 
in few boards. I am writing some value in RTC on power on but it is 
not incrementing. 
>          This type of problem is not in all board but few of 
them.Some board work without any problem.
>           I also observed that when i use jlink for debug ,value of 
RTC register(SEC,MIN etc) are incrementing ,but these increment are 
slow. When i come out of debug & send data on serial port ,i have 
getting 0 data continously.
>          I have also check VBAT voltage which found ok.
>          Please help me ,if any one can.
>      
> Regards,
> Pandurang S.
> 
> 
> [Non-text portions of this message have been removed]
>

Do you use an external crystal? Have you checked the oscilator pins 
for a 32 KHz wave?

Guille







SPONSORED LINKS 
Microcontrollers <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=mfaAujKZXA2Z_vxre9sGnQ>  	Microprocessor <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=9jjd2D3GOLIESVQssLmLsA>  	Intel microprocessors <http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=OMnZuqMZX95mgutt4B-tDw>  	
Pic microcontrollers <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontrollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&c=4&s=95&.sig=Malspbd0T4Rq3M4Q0nHrfw>  	

________________________________

YAHOO! GROUPS LINKS 


	
*	 Visit your group "lpc2000 <http://groups.yahoo.com/group/lpc2000> " on the web.
	  
*	 To unsubscribe from this group, send an email to:
	 lpc2000-unsubscribe@yahoogroups.com <mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
	  
*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . 


________________________________




[Non-text portions of this message have been removed]