Lpc2000

Sorry, there are some simple mistakes.
The reason why all these errors occurred is an "=" missing in the 
instructions.
ldr sp, _svc_stack
it should be:
ldr sp, =_svc_stack

:)

Kevin
 
--- In lpc2000@yahoogroups.com, "volunteer_sysu" <volunteer01@...> 
wrote:
>
> I am quite new to LPC2000. When I was trying to building up a 
> program, I encountered some problems. Would you please do me a 
> favour, thank you very much!
> The problem is some errors occurred when I made the Makefile. The 
> errors are as follows.
> $ make
> arm-linux-gcc -arm-32-msoft-float-mno-fpu -c -o startup.o startup.S
> startup.S: Assembler messages:
> startup.S:69: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:72: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:75: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:78: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:81: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:84: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:119: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:120: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:128: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> startup.S:129: Error: internal_relocation (type: OFFSET_IMM) not 
> fixed up
> make: *** [startup.o] Error 1
> 
> And codes where errors occurred are as follows.
> StackInit:
> 	mov	r0, lr
> /* build the SVC stack */
> 	msr	cpsr_c, #0xd3
> 	ldr	sp, _svc_stack
> /* build the IRQ stack */
> 	msr	cpsr_c, #0xd2
> 	ldr	sp, _irp_stack
> /* build the FIQ stack */
> 	msr	cpsr_c, #0xd1
> 	ldr	sp, _fiq_stack
> /* build the ABT stack */
> 	msr	cpsr_c, #0xd7
> 	ldr	sp, _abort_stack
> /* build the UND stack */
> 	msr	cpsr_c, #0xdb
> 	ldr	sp, _undefined_stack
> /* build the SYS stack */
> 	msr	cpsr_c, #0xdf
> 	ldr	sp, _usr_stack
> /* return back */
> 	mov 	pc, r0
> 
> I did defined the variables: _svc_stack, _irq_stack, ..., in the 
> link file and allocated them to a specific address by using such 
an 
> expression: _svc_stack=.; ,what's wrong? Help! Thanks again for 
your 
> attention.
> 
> Best regards,
> 
> Kevin
>