Lpc2000

Hi,

try enabling the interrupt by removing the two slashes at calling the
function __ARMLIB_enableIRQ()... 

--- In lpc2000@yahoogroups.com, "federr65" <feder@...> wrote:
>
> I'm just starting with LPC ( I have a LPC-H2138 board from Olicom) and
> at the beginning I'm unable to solve the following problem:
> I have an Timer0 set to generate interrupts. Timer works just fine,
> but I can't force the ISR to execute.
> Below is my code:
> 
> #include <targets/LPC213x.h>
> 
> #define LED 0xF0000000;
> 
> static int timer0Count, timer1Count;
> int marker=1;
> 
> 
> static void PLL_Init(void)
> {
>   PLLCON=0x00000003; //Kwarc razy 4
>   PLLCFG = 0x23;
>   PLLFEED = 0xAA;
>   PLLFEED = 0x55;
> }
> 
> void inititate (void)
> {
> //PLL_Init(); 
> //MAMCR = 2; 
> IO0PIN=0x0;
> IO1PIN=0x0;
> IO0DIR = 0xFFFFFFFF;  
> IO1DIR = 0xFFFFFFFF;
> }
> 
> 
> 
> static void timer0ISR(void) __attribute__ ((interrupt ("IRQ")));
> 
> static void timer0ISR(void)
> {
> if (IO0PIN=0) 
>   {
>   IO0SET=LED;
>   }
>   else
>   {
>   IO0CLR=0;
>   } 
>   /* Clear the timer 0 interrupt */
>   T0IR = 0xFF;
>   /* Update VIC priorities */
>  VICVectAddr = 0;
>   marker++;
> }
> 
>  
> int main(void)
> {
> inititate();
>   
>  // Timer 0 interrupt is an IRQ interrupt, none is FIQ */
>   VICIntSelect =0x0;
>   /* Clear all IRQ and Enable timer 0 interrupt */
>   VICIntEnClr = 0xFFFFFFFF;
>   VICIntEnable = 0x10;
>   /* Use slot 0 for timer 0 interrupt and enable it (bit5)*/
>   VICVectCntl0 = 0x24;
>   /* Set the address of ISR for slot 0 */
>   VICVectAddr0 = (unsigned int)timer0ISR;
>   /* Match 0 reset - mo¿e nie byæ konieczne do dzia³ania*/
>   T0IR = 0x1;
>   /* Reset and stop timer 0 */
>   T0TCR = 0x2;
>   /* Set the timer 0 prescale counter */
>   T0PR = 0x0;
>   /* Set timer 0 match register */
>     /* Set timer 0 match register */
>   T0MR0 = 0xffff;
>   /* Generate interrupt and reset counter on match */
>   T0MCR = 0x3;
>   /* Start timer 0 */
>  T0TCR = 1;
> 
>    /* Enable Interrupts */
> // __ARMLIB_enableIRQ();
> 
> 
> while(1);
> }
>