Lpc2000

I would be interested by the algorithm or the source code for initializing
the FPGA, because I'm working too on project in which we have a LPC2106 and
a Cyclone chip.
Do think it's possible to do it with SPI port ?

Benjamin PRADAYROL


-----Message d'origine-----
De : leon_heller [mailto:leon_heller@...] 
Envoyé : lundi 5 avril 2004 15:37
À : lpc2000@yahoogroups.com
Objet : [lpc2000] LPC2106 and FPGA

Some time ago I mentioned that I was thinking of producing a PCB with an
LPC2106 and FPGA on it. I was intending to use a Xilinx Spartan-3, but they
are very difficult to get hold of, so I've decided to use the much easier to
find Altera Cyclone EP1C3T100. I've ordered a few and will get them
tomorrow.

The Cyclone chip shall be configured via the LPC2106, which will have a
flash device for the configuration data interfaced to it. Most of the
LPC2106 I/Os will be connected to the FPGA, with the other FPGA pins
connected to headers for a daughter board. A socket for a DIL clock module
will be provided with the clock output connected to a PLL input on the FPGA.
The PCB will have four layers.

If anyone is interested in this project and would like to discuss it, please
get in touch.

Leon



------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy
Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer
at MyInks.com.  Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dN_tlB/TM
---------------------------------------------------------------------~->

 
Yahoo! Groups Links