Lpc2000

--- In lpc2000@yahoogroups.com, Johan Forrer <jbforrer@y...> wrote:
> Greetings,
> 
> After being around the block a few times with this
> sticky issue, thought I'd pass along my findings.
> 
> Both OcdCommander and OcdLibRemote works with the
> Wiggler hardware on the LPC210x, but you'll need to
> disconnect nRST connection for the LPC210x target. 
> 
> Since nRST behaves differently on my EB40A eval
> board(AT91R40008) and I move between these two
> platforms, I installed a toggle switch on the Wiggler
> box to enable/disable nRST control; Enable nRST for
> the Atmel, and disable it for the LPC210x.
> 
> There was some discussion of this issue on Usenet ---
> not clear what exactly the issue is, evidently there
> are subtle differences. Anyhow, as long as it works
> and we can have fun now.

OCDCommander works fine for me with nRST connected to the Wiggler. I 
haven't tried OCDLib Remote with it yet.

Leon