Lpc2000

Actually, I've found just the opposite.  I've has to disconnect
nRST when working with Atmel ARMs but have had no problem with
it being connected when working with the LPC.

-Bill Knight
R O SoftWare


On Thu, 15 Apr 2004 08:50:34 -0000, leon_heller wrote:

>--- In lpc2000@yahoogroups.com, Johan Forrer <jbforrer@y...> wrote:
>> Greetings,
>> 
>> After being around the block a few times with this
>> sticky issue, thought I'd pass along my findings.
>> 
>> Both OcdCommander and OcdLibRemote works with the
>> Wiggler hardware on the LPC210x, but you'll need to
>> disconnect nRST connection for the LPC210x target. 
>> 
>> Since nRST behaves differently on my EB40A eval
>> board(AT91R40008) and I move between these two
>> platforms, I installed a toggle switch on the Wiggler
>> box to enable/disable nRST control; Enable nRST for
>> the Atmel, and disable it for the LPC210x.
>> 
>> There was some discussion of this issue on Usenet ---
>> not clear what exactly the issue is, evidently there
>> are subtle differences. Anyhow, as long as it works
>> and we can have fun now.

>OCDCommander works fine for me with nRST connected to the Wiggler. I 
>haven't tried OCDLib Remote with it yet.

>Leon