Lpc2000

Hi Milos,
 
Ashling customers should download the latest software (v113) from our
support site. This includes updated versions of all our examples that fix
problems in the initial release (with the FULL example etc.).  Contact me
directly if you need further clarification/assistance
 



Hugh @ http://www.ashling.com/support/lpc2000/ 

-----Original Message-----
From: Milos Prokic [mailto:mproki@...] 
Sent: 22 April 2004 13:23
To: lpc2000@yahoogroups.com
Subject: RE: [lpc2000] LPC210x I2C Examples?



Hi Hugh,

The examples are taken from the Ashling software release indeed. They are
quick, dirty and buggy in the case of the code for the full that is "ready"
for flash (interrupt). I remember trying it several months ago when I got my
hands on a couple of those boards and it didn't work.

As for being "production" code. well I don't think I need to comment on
that.. But I think the person that asked for the sample code had no clue how
to use I2C hence I figured these dirty examples are a good starting point
for him. (the examples were posted after someone else requested them
explicitly). Sending my full blown I2C and SPI handler will be an overkill,
don't you think? When I started messing around with I2C that example was my
starting point too.

Your comment that it was made for the Ashling EVB7 is legit, but it also
doesn't make too much of a difference except that one must have a 14 MHz
oscillator attached if they want to try the UART part of the example without
modifying anything. Am I missing something?

All the best,

m. 

 

 

 

 


  _____  


From: Hugh O'Keeffe [mailto:hugh.okeeffe@...] 
Sent: Thursday, April 22, 2004 2:45 AM
To: lpc2000@yahoogroups.com
Subject: RE: [lpc2000] LPC210x I2C Examples?

 

Hi Group,

 

FYI, the examples Milos Prokic posted seem to be taken from an Ashling
LPC2000 software release. Note:

 

1. These examples are meant to run on our EVBA7 board.

2. The I2C interfacing is "quick&dirty" and not recommended for production
code.

3. The group have produced much better "production" I2C  examples which are
available in the files section.

 

 

Hugh @ http://www.ashling.com/support/lpc2000/ 

-----Original Message-----
From: Milos Prokic [mailto:mproki@macs.ece.mcgill.ca] 
Sent: 21 April 2004 21:32
To: lpc2000@yahoogroups.com
Subject: RE: [lpc2000] LPC210x I2C Examples?

Hi,

I have included 2 examples that use I2C chips. also interrupts, UART0.

Enjoy,

m.

 


  _____  


From: Johan Forrer [mailto:jbforrer@...] 
Sent: Wednesday, April 21, 2004 4:23 PM
To: lpc2000@yahoogroups.com
Subject: [lpc2000] LPC210x I2C Examples?

 

Hi All,

Since Philips is strong in I2C, does anyone know
whether there are some I2C example code for the
LPC210x, like that published in the 8XC552 data
sheets?

I'd like to experiment with the LPC210x I2C interface
and wonder whether anyone has experience with the
LPC210x I2C or know of a working example that I can
try out.

Thanks much.

Johan, KC7WW



 

 



  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/lpc2000/
  

*	To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
<mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .