Lpc2000

----- Original Message ----- 
From: "nonuckingfumber" <nonuckingfumber@...>
To: <lpc2000@yahoogroups.com>
Sent: Tuesday, June 15, 2004 1:11 PM
Subject: [lpc2000] Re: Board with RS232 and RS485


> --- In lpc2000@yahoogroups.com, Jens Hildebrandt
> <jens.hildebrandt@r...> wrote:
> 
> > The Eval-Board I use for myself has an LPC2104/05/06, one full
> serial Port and 
> > one serial port configurable as either RS232 with Rx/Tx or
> 2-Wire/4-Wire RS485. 
> > If you want, you can get the Schematics and Gerber Files. The PCB
> was made at 
> > olimex.com, components were hand soldered. Nothing great but it
> works and 
> > probably would satisfy your needs.
> > 
> > Jens
> 
> Sounds ideal......but I cannot find any reference of it, or any
> reference to RS485 on thier 210x based boards. Dou you have any
> name/ref number for it?

It isn't actually one of Olimex's, Jens had it made for himself.

Leon