Hi Lasse, If you are interested in a Free, yet reliable RTOS check ucos-ii.com & my port for ARM7s/9s is free & is up in the following link, it also includes BSP for LPC (RTOS+BSP for LPC takes only 4KB of code space). http://geocities.com/michaelanburaj/uCOS/index.html You can run LwIP TCP/IP stack on top of uCOS-II & I have port for this also at the same link. As far as tool chains: ADS is by far the BEST (it has to be). GCC is quiet good... I have done lots of porting work ADS->GCC & worked on very complex huge images.. with all the experience I say this. I have not idea about KEIL or other ARM tools. Cheers & Good-luck, -Mike. --- jrcmx1234 <jr@...> wrote: > Greetings, > > CMX offers an RTOS and a TCP/IP stack with PPP, AT > Modem commands, > etc., for the LPC platform. The software supports > the ARM, IAR, or > KEIL compilers for these processors. The url is > www.cmx.com > > Best Regards, > > JR Rodrigues > CMX Systems, Inc. > > --- In lpc2000@yahoogroups.com, "Lasse Madsen" > <lm@h...> wrote: > > Hi Taner. > > > > Thanks for the advice, the modem is already GPRS > enabled and i was > hoping to > > find an RTOS with a PPP TCP/IP > > protocol stack ( I have written my own but its not > at all what I > would like > > it to be ! ) > > > > > > I was told that there where problems with SD > CARD's using the > hardware SPI > > port !?!?!?!? > > What is this all about and did someone find a > solution ? > > > > Best regards > > Lasse Madsen > > > > -----Oprindelig meddelelse----- > > Fra: Taner Mutlu [mailto:tanermutlunun@y...] > > Sendt: 2. juli 2004 11:34 > > Til: lpc2000@yahoogroups.com > > Emne: Re: [lpc2000] My First LPC design... > > > > > > welcome to ARM world!! > > I have made the same project-> GPS -> however I > > would recommend you to use GPRS modem instead of > > GSM(of course if u do it for commercial manner). > > > > I use the KEIL IDE and in KEIL u can select the > ADS > > compiler as an option. however I prefer the GNU > > compiler to ADS compiler. > > > > --- Lasse Madsen <lm@h...> wrote: > > > Hi all. > > > > > > I have been monitoring this group for about half > a > > > year now waiting for the > > > "right" time to start an LPC project, that time > is > > > now! I've made a simple > > > datalogger with an SD card,GPS and GSM modem in > a > > > similar design I currently > > > use with an atmel avr, I would appriciate if > someone > > > would take a breif look > > > at my schematic and see if I have made any > obvious > > > mistakes with the LPC and > > > its bootloader select pin etc. > > > > > > Diagram: > > > http://www.electro-logic.com/diagram.pdf > > > > > > At the same time I would like to ask if anyone > has > > > worked with the Keil > > > uVision compiler, as I will probertly be using > > > this compiler or the ARM ADS depending on which > is > > > best and easiest to use, > > > any comments ? > > > > > > Best regards and many thanks for having me in > this > > > great group ! > > > > > > Lasse Madsen > > > > > > > > > > > > ------------------------ Yahoo! Groups Sponsor > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > lpc2000-unsubscribe@yahoogroups.com > > > > > > > > > > > > > > > > > > ===== > > Taner Mutlu > > Elektronik M|h. > > GLOBAL Bilgisayar ve Kontrol Sistemleri > > taner@g... > > > > > > > > > > __________________________________ > > Do you Yahoo!? > > New and Improved Yahoo! Mail - 100MB free storage! > > http://promotions.yahoo.com/new_mail > > > > > > > > > > Yahoo! Groups Links > > __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail
Message
Re: SV: [lpc2000] My First LPC design...
2004-07-03 by Michael Anburaj
Attachments
- No local attachments were found for this message.