Lpc2000

Read the I2C documentation in the user manual.  P0.02 and P0.03 are open
drain pins.  You need a pull-up.  (Been there, done that, got the
T-shirt!)

-----Original Message-----
From: rkd0930home [mailto:rkd0930@...] 
Sent: Tuesday, July 27, 2004 6:46 AM
To: lpc2000@yahoogroups.com
Subject: [lpc2000] Trouble with P0.2 as GPIO


Hi All,

I am having difficulty with controlling pin P0.2 as a GPIO output 
signal. I am successfully controlling several other pins on my board. 
I have set bit 4 and 5 of PINSEL0 to zero. I have set bit 2 of IO0DIR 
to 1 and I have set bit 2 of IO0SET to 1. P0.2 stays at zero. I have 
used the same procedure on other pins with success. Is there 
something I am missing?  

Thanks,
Bob Davis 




 
Yahoo! Groups Links